06 May 2016

Redmi Note 4G Model : 2014712 Flash done with Mi Flash tool (tested)

Posted by
06 May 2016
Sponsored Links
Redmi Note 4G Model : 2014712 this device in issue of hang on logo not ahead after full flashing i was different Stock Rom firmware use for flashing but no success so i search in internet for that solution and i found one but i don't sure about new solution but i understand just try and what happen using new found solution just unbeliever just few second done that really awesome for solution no need to flash no need new firmware download just connect device with fastboot mode and just run command in command prompt so if you some time will got solution just try and you will to be better but remember before use check below comment this new solution working well or not after try in flash some time don't show below comment and i try then device will dead or other issue so first read all are content after try step by step solution here some few description about firmware just see below

Redmi Note 4G Model : 2014712 flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Redmi Note 4G Model : 2014712 Stock ROM Download DownloadMirror
Redmi Note 4G Model : 2014712 MiFlash tool Download HERE
Redmi Note 4G Model : 2014712 USB Flashing Driver Download HERE

Required for Flash:

  • Readmi Note 4G device
  • Redmi Note 4G Stock Rom Firmware
  • Redmi Note 4G MiFlash tool
  • Redmi Note 4G USB Driver
  • Micro usb cable
  • Computer or Laptop

Formality:

  • Take tested Stock ROM firmware from above link (plz if link dead just leave your comment)
  • Go to Firmware winrar and please rename to .tgz, if is .gz or tar
  • Extract to desktop both winrar (Note : Must your firmware folder in desktop)
  • Open Mi folder and choose MiFlash.exe file and open it
  • Click on Browse button and choose firmware folder who in desktop (see below image)
  • Click on Point button near browse button and choose Advance option (see below image)
  • Choose Browse.. button to FastBoot script's and choose flash_all_except_data_storage.bat file from desktop firmware folder (see below image)
  • Turn off device, Press the Volume Down + Power keys same time for enter Fastboot mode
  • Attach Micro USB cable and click on Refresh button in flash tool (for device detect or not)
  • If device detect with flash tool then click on Flash button
  • Wait until driver install, if driver installed in computer or laptop then downloading automatically start
  • Wait until full flash device
  • Congratulation you are done
Redmi Note 4G Model : 2014712 Screenshot:

Redmi Note 4G Model : 2014712 Flash done Video:
Sponsored Links

29 comments:

  1. i use this tutorial.flashing error,unspecified error(oxfffffff:)

    ReplyDelete
    Replies
    1. Copy Extract Firmware folder and paste to desktop and try again

      Delete
  2. got the same i use this tutorial flashing error partition to erase? what mean?

    ReplyDelete
    Replies
    1. Try this Step 1. put extracted folder on desktop and try again 2. restart computer and following this here

      Delete
  3. Go to Firmware winrar and please rename to .tgz, if is .gz or tar
    WHAT THE RENAME FILE
    AND HOW

    ReplyDelete
    Replies
    1. You had downloaded firmware file and first do rename it zip file and after that you can extract for more know see video

      Delete
  4. Hello I flash my mobile and After then it is not switching on

    ReplyDelete
  5. Replies
    1. Select Image folder not only Firmware folder and try again

      Delete
  6. Enter your comment...hi boss flash work mi Xiaomi Redmi Note 4G error please solution

    ReplyDelete
  7. Thanks Dear Brother file is 100000% ok
    Tested me HKmobile sahawer gate kasganj

    ReplyDelete
  8. Hi bro ,as per ur tutorial i was done for my redmi note 4g mobile.

    I used miflash application in my windows 10 laptop.

    After flash, mi account not deactive

    Please give the solutions.

    ReplyDelete
  9. iam getting
    unspecified error 0x80004005 Failed remote failed to erase partition
    plz help me to get rid of it

    ReplyDelete
    Replies
    1. Where is put firmware folder ? try put firmware folder on desktop

      Delete
  10. hello sir

    When was i trying to flash it just take 3 second for flash...
    Mi account not gone
    What i can do

    ReplyDelete
    Replies
    1. Try charge full battery and try agian

      Delete
  11. I'v tryed all method, but still showing unspecified error 0x80004005 can't load drive, i'v tryed all drive, please help me

    ReplyDelete
    Replies
    1. put firmware on c drive or d drive Note : firmware folder must be without spacing

      Delete
  12. Sir, I have problem on mi note 4g. It is can not catch any network.
    It is not changing 2G mode. What will can do now?

    ReplyDelete
    Replies
    1. dear brother phone flash with latest version flash file

      Delete

If any problem just write down your message on below comment box