30 December 2015

Mi Redmi 1S Flash done with flash tool

Posted by
30 December 2015
Sponsored Links

Must Read:
This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Mi Redmi MiPhone Flash tool download Mirror
Mi Redmi 1S ROM Download  Mirror
Xiaomi 2014818 USB Flashing Driver Download HERE

Required for flash:

  • Mi Redmi 1S device with good battery charged (do not try with low battery)
  • Mi Redmi 1S tested firmware (armani_global_images_5.4.10_4.4_global_545974962a)
  • MiFlash flash tool
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Download tested ROM or Flash tool from above link (if link not working then write down comment on below comment box)
  • Go to Firmware winrar and please rename to .tgz, if is .gz or tar
  • Extract to desktop both winrar (Note : Must your firmware folder in desktop)
  • Open Mi folder and choose MiFlash.exe file and open it
  • Click on Browse button and choose firmware folder who in desktop (see below image)


  • Click on Point button near browse button and choose Advance option (see below image)
  • Choose Browse.. button to FastBoot script's and choose flash_all_except_data_storage.bat file from desktop firmware folder (see below image)


  • Turn off device, Press the Volume Down + Power keys same time for enter Fastboot mode


  • Attach Micro usb cable and click on Refresh button in flash tool (for device detect or not)
  • If device detect with flash tool then click on Flash button
  • Wait until driver install, if driver installed in computer or laptop then downloading automatically start
  • Wait until full flash device
  • You are done


Mi Redmi 1S Flash done with flash tool screenshot:

Mi Redmi 1S Flash done with flash tool video:

Note
1. Please any issue when using this tutorial so must write your query in below comment
2. If after flash and hang on logo just try this link tutorial see here
Sponsored Links

6 comments:

  1. firmware is not getting downloaded.
    tell me what to do

    ReplyDelete
  2. pll mujhe mi note 4g single sim driver chayea

    ReplyDelete
  3. file is been getting corrupted after extracting

    ReplyDelete
    Replies
    1. first try to rename firmware to .tgz, if is .gz or tar if not working then extract with 7-zip software download from the here

      Delete

If any problem just write down your message on below comment box