-->
Wednesday, November 19, 2014

Note3 N9006 MTK6572 flash Firmware in volcano box 100% Tested

Posted by
Wednesday, November 19, 2014
Sponsored Links

 Procedure for How to Write to Read file:

  • Open Volcano box
  • Jump to Android Tab
  • Choose USB MODE tab
  • Click on Write Flash option and choose read bin file
  • Click on Start button and Press and Hold Volume Up (or Boot key) and insert usb cable
  • Wait for driver installing, if driver installed in your computer then start automatically
  • Wait until full process
  • Congratulation you are done
Download Link
(Without Password's Volcano Read File) Note 3 N9006 MT6572 Flash file Download here
Note3_N9006_MT6572_SM1327_4.3_Download here

Success flash Tutorial:

Note : if any problem in this flash write down comment here from the below comment box
Sponsored Links

18 comments:

  1. download file flash finish = die phone!! ( volcano) !!!

    ReplyDelete
  2. download file flash phone = die phone ( volcano)

    ReplyDelete
  3. My phon is restarting and not going to download mode will this works

    ReplyDelete
    Replies
    1. Dear brother this is china Samsung device so you can't going to download mode, just using volcano or miracle box and choose press and hold volume up button and flash that :)

      Delete
  4. Replies
    1. Check link again there no any password or also put factory firmware :)

      Delete
  5. Replies
    1. Now also available link of volcano read file without any password check link again

      Delete
  6. Note3_N9006_MT6572_SM1327_4.3_Download here

    link is fine, but there's no file in it (File Not Found),
    please re-upload, thanks :)

    ReplyDelete

Write Your Problem in the Below Comment Box