18 November 2014

Xolo Q1000 Opus pattern unlock done with flash free here 100% tested by me

18 November 2014
Sponsored Links
Must Read:
This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Here final unbrick firmware for Q1000 opus it is simple no work hard if understand our tutorial and i am sure it is good firmware need some required for that so download below link

Download Link
Xolo Q1000 Opus Firmware Download here

Required for flash:


  • Xolo Q1000 Opus device with good battery charged ( do not try with low battery)
  • Xolo Q1000 Opus tested firmware
  • SD Card
  • DFU tool
  • Micro usb cable
  • Computer or Laptop

Procedure:


  • SETP : 1
    • Exract to DFU tool.zip file from winrar
    • Open it and you can see "Install_driver.exe" exe double click on that exe and install driver in few minute
    • After that driver properly install in your pc then double click on "DFU.exe"  
    • It first give you an error message but don't work just go to next step
    • It open first you can see above "Settings" option and in there one option more of "Browse" click there and choose "image" file in DFU tools -->variants
    • After that go to "Download" option near "Settings" option
    • Click on "Start" button now your DFU Tools search usb driver
    • Just out of mobile battery and again insert battery press and hold volume up + Down button and insert USB cable now automatically driver installed and also starting automatically
    • After full install in your mobile so auto restart your mobile
    • Here first step done (if any query about that mobile just comment below box)
  • STEP : 2
    • Now copy "update.zip" file in your SD card second downloaded
    • Turn off your mobile and in SD card in your mobile
    • Now go to  settings --> About Phone --> Software Update click to check for updates button in mobile
    • There automatically show update via from SD Card see below picture
http://s26.postimg.org/eb1lnb3eh/SD_install.jpg


    • Click on "Continue" button your mobile restarting and install update.zip file from SD card
    • You are done :)

 Note : if any doubt in this tutorial just write download comment here i will solve that
Sponsored Links

6 comments:

  1. WHEN I FLASH WITH THIS FLASH TOOL FINALLY SET DEAD.

    ReplyDelete
    Replies
    1. check first software version :) after do flash and this is tested by me without any risk :)

      Delete
  2. after flash mobile network not available

    ReplyDelete
    Replies
    1. check imei number :) from dial *#06#

      Delete

If any problem just write down your message on below comment box