-->
Wednesday, April 26, 2017

How to Remove Virus, Fix Software Problems, Fix Stuck on Logo in Micromax Canvas Nitro A311

Posted by
Wednesday, April 26, 2017
Sponsored Links
Micromax Canvas Nitro A311 in this device software related issue so use this guide really awesome and easy to use without any box and your device then download first it and following same method no any different for another version, this method you can use without any box its done from flash tool its also available here, and impotent of must be installed phones driver, you can't flash or upgrade if not installed in your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try, you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on wifi connection, auto apk installing, auto gone balance, pattern lock, screen lock.

Micromax Canvas Nitro A311 in any type issue software related you can easy solve using this method and this is for everyone who new fresher technician or experience technician in android software related, before use remember must be working well all are required which you can see in this method it below to be mention, different to be error when you try to flash or upgrade first of USB not recognized this error possible when micro USB not working, battery not charged, phone USB socket not working properly so if you fail with this method just write down your comment on below comment box i will soon possible to fix it, first take backup into device if live otherwise dead you can't take backup, this method use when device in dead condition also but must be in software problem in hardware device not be live.
Must Read before following:
Micromax Canvas Nitro A311 want to repair remember this which is you have to charge your battery with any charger and charged it by 85%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details, your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, SD card or any other suitable devices. If you are doing by your own.do it at your own risk as we don't take any responsibility if your device is damaged

Required for Micromax Canvas Nitro A311

  • Micromax Canvas Nitro A311 phone with good battery and do not try with low battery
  • Micromax Canvas Nitro A311 Tested Stock ROM Firmware | Download
  • Micromax Canvas Nitro A311 Flash tool | Download
  • Micromax Canvas Nitro A311 USB (Flashing) Driver | Download
  • Good Quality Micro USB cable
  • Computer or Laptop

Procedure for Micromax Canvas Nitro A311

  • First Downloading required from above link, if link not working just leave your comment on below comment box i will soon fix it if possible
  • Extract to anywhere you want or Desktop from the WinRAR, must be installed WinRAR software in your computer or laptop
  • Install YGDP_Setup_V3.98_Assembly.exe
  • Check desktop there to be icon for YGDP flash tool open it

  • Write down password : 369 in Password box then click on Login button
  • Click on Config button and click on CPB file button and choose 4.4.012.P1.141110.8297W_I02.CPB file
  • Click on Apply button and wait a few minute until properly read flash file


  • Click on Start button, Press and hold Volume Up and Insert USB Cable
  • Wait until Driver Installing, if already installed in your Computer or Laptop then Download Start automatically into device
  • Do not try to Unplug device while flashing mode
  • Congratulation you are done
    Micromax Canvas Nitro A311 Flash done Screenshot:


    Micromax Canvas Nitro A311 Flash done video:
    Sponsored Links

    2 comments:

    1. When i connect the USB in my phone it starts automatically and thats why i m unable to flash it....What should i do plss help me

      ReplyDelete
      Replies
      1. Try Press and hold Volume Down and Insert USB Cable for fastboot mode after that you can start flashing

        Delete

    Write Your Problem in the Below Comment Box