-->
Friday, March 17, 2017

Fix QFIL Sahara fail error and Disable Driver Signature Enforcement For Windows 7/8/10 64bit

Posted by
Friday, March 17, 2017
Sponsored Links

This is most impotent for everyone who flashing in QFIL Flash tool cause some time comes error on displayed which is "Sahara Fail" error for that given here solution if you want. This is for Windows 7 32bit-64bit, Windows 8 32bit-64bit, Windows 10 64-Bit

If want to fix device, can try to repair it by. have to charge a battery with any charger and charged it by 90%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

You can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Disable Driver Signature Enforcement For Windows 7 64bit

  • Click on Start button and choose "All Programs", again choose "Accessories", there to be "Command Prompt" right click on from the Mouse that and choose "Run as administrator"
  • Type this command 
    • "bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS" and hit Enter key
    • Again type "bcdedit.exe -set TESTSIGNING ON" and Hit Enter key
  • Reboot your Computer or Laptop
  • Now you can see Signing Enforcement is disable on the lower right hang side corner
  • If you want to "Enable Driver Signature Enforcement" then following below code
    • "bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS" and hit Enter key
    • Again type "bcdedit.exe -set TESTSIGNING OFF" and hit Enter key

For Temporary Disable Driver Signature Enforcement

  • Reboot your Computer or Laptop, Press "F8" key continuously until "Advanced Boot Options"
  • Go Down from the arrow key and choose "Disable Driver Signature Enforcement" and Hit Enter key
  • It will be automatically reboot with disable driver signature enforcement mode

Disabling for Windows 8.1 / 10 64-bit

  • Right click on Windows button and then click "Command Prompt (Admin)" OR Press Windows key + X see below image
  • Type this command 
    • "bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS" and hit Enter key
    • Again type "bcdedit.exe -set TESTSIGNING ON" and Hit Enter key
  • Reboot your Computer or Laptop
  • Now you can see Signing Enforcement is disable on the lower right hang side corner
  • If you want to "Enable Driver Signature Enforcement" then following below code
    • "bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS" and hit Enter key
    • Again type "bcdedit.exe -set TESTSIGNING OFF" and hit Enter key

For Temporary Disable Driver Signature Enforcement

  • Restart Computer or Laptop with hold down the SHIFT key as below image
  • After that need to choose "Troubleshoot" option
  • Choose "Advanced" options as below image
  • Choose "Startup Settings" option as below image
  • Click on "Restart" button see below image
  • After that restarting again in Startup settings then press F7 key to choose "Disable driver signature enforcement" as below image
  • After that your Computer or Laptop will reboot then install necessary unsigned Driers and "Install this driver software anyway" as below image
  • Congratulation and Enjoy !
Sponsored Links

6 comments:

  1. Microsoft Windows [Version 6.1.7600]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.

    C:\Users\Hari>bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
    The boot configuration data store could not be opened.
    Access is denied.

    C:\Users\Hari>bcdedit.exe -set TESTSIGNING ON
    The boot configuration data store could not be opened.
    Access is denied.

    C:\Users\Hari>

    ReplyDelete
  2. This error is showing when I enter the command.
    An error has occurred setting the element data.
    The value is protected by Secure Boot policy and cannot be modified or deleted

    ReplyDelete

Write Your Problem in the Below Comment Box