-->
Saturday, February 06, 2016

How to Flash Intex Aqua Y2 1GB with flash tool ? with simple method

Posted by
Saturday, February 06, 2016
Sponsored Links

About this tutorial or firmware:

This intex Aqua Y2 1GB  device in hang issue when customer take in my shop then i try first i check shorting in device but there no any shorting in any side, if not shorting in device from all side after check first in software when i try in flash with sp flash tool then device working well my suggestion for everyone who work in android device in software related first check device in hardware after try in flashing because if device short and try in flash then device will be dead or other issue.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes. 

Download Link
Intex Aqua Y2 1GB Firmware or flash tool download here

Required for flash:

  • Intex Aqua Y2 1GB device with good battery charged (note : do not try with low battery)
  • Intex Aqua Y2 1Gb tested firmware or flash tool where above link you can download from there
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Take firmware or flash tool from above link (if link not working just write down comment on below comment box)
  • Extract to desktop or as you like path ( must installed winrar software in your computer or laptop)
  • Open SPD Upgrade Tool vR2.9.9015 folder and open UpgradeDownload.exe file
  • Click on Firmware button and choose W230IN2_RAM1GB_user_14175_150420.123438.pac file from firmware folder
  • Now Click on Download button
  • Press and hold Volume Down button and insert usb cable into device
  • Wait until driver install, if driver installed in your computer or laptop then downloading start in device automatically
  • Wait until full install android os (note : do not disconnect while device in flashing mode
  • Congratulation you are done from above mention issues

Intex Aqua Y2 1GB Flash done with flash tool screenshot:

Intex Aqua Y2 1GB Flash done Video
Sponsored Links

2 comments:

  1. this download link invalidate.
    please add download link.

    quickly add link.

    ReplyDelete
    Replies
    1. Link has been updated Note: Second if same happen any other link just Rename gsmxda to gsmhelpful then hit enter

      Delete

Write Your Problem in the Below Comment Box