-->
Thursday, February 11, 2016

Gionee S96 Flash done with SP Flash tool (tested)

Posted by
Thursday, February 11, 2016
Sponsored Links

This device was white light in display then restarting issue when i use below flash file or flash tool then success without any problem and working well but not only that to be problem in device then use this flash file but you can use this flash file any software related issue and this use for not need any box you can flash in flash tool and this is below link.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Gionee S96 Flash file download here | Mirror
FlashTool_v5.1308.00 download here

Required for flash:

  • Gionee S96 device with good battery charged
  • Gionee S96 tested flash file (file are above link)
  • FlashTool_v5.1308.00 Flash tool
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Download tested flash file or flash tool from above link (if link not working then leave comment on below comment box)
  • Extract to both files into desktop or as you like path (must installed winrar software in your computer or laptop)
  • Open FlashTool_v5.1308.00 folder and choose flash_tool.exe file and open it
  • Click on Scatter/Config File button and choose GIONEE60A_11B_BB.cfg file
  • Click on Download button
  • Press and hold '0' key and insert usb cable
  • Wait until driver install, if driver installed in your computer or laptop then downloading start automatically
  • Wait until full install (do not disconnect device while device in flashing mode)
  • Congratulation you are done

Gionee S96 Flash done with SP Flash tool screenshot:

Gionee S96 Flash done with SP Flash tool video

Sponsored Links

6 comments:

Write Your Problem in the Below Comment Box