11 December 2015

Microsoft RM-1035 (130) Dual Sim Unlock, Restarting, Hang on log done with simple method

Posted by
11 December 2015
Sponsored Links

This tutorial tested by me without any risk but this issue do fix to need box, if you use this tutorial or trick so remember you can't save any data like contacts, images, videos etc because this is full factory reset, and also must check your device battery if not full charged so coming error between do process, if error coming then your device will be dead so remember must this topic and also check micro usb cable if not good then your device not connect or other error show like usb not recognized  with box tool, this tricks many problem solved like security lock, phone lock, memory card lock, contact lock, photo gallery lock, videos lock etc not let's go how to this many problem solve by box tool see below.

Required for above problem done:

  • Microsoft RM-1035 (130) device with good battery charged
  • Miracle box or other chines box (option to be there)
  • Micro usb cable (with good working)
  • Computer or Laptop

Procedure:

  • Connect Miracle box with Computer or Laptop
  • Open Miracle box
  • Go to MTK tab option
  • Choose Service option
  • Again choose Format option
  • Untick on Safe Mode option
  • Tick on Auto option
  • Choose 10th Boot(Nokia RM-969/70|1035/6)USB boot select option
  • Tick on USB Cable option
  • Last Click on Start button
  • Insert battery in to device and insert Micro usb cable in device
  • Wait until full format
  • You are done
Microsoft RM-1035 (130) Format done in Miracle box screenshot:

Microsoft RM-1035 (130) Format done in Miracle box Logs:
 Definition Applied  
 1. Power Off Phone , Remove Battery, Insert Battery Back  
 2. Insert USB cable. In some cases Required Hold BootKey  
 3. Use Miracle Boot Key In cases Boot key not Find  
 4. Battery Should be Charged more then 50%  
 Definition Applied  
 you can Set Formatting Addr  
 Waiting for USB Port...  
 Set Nokia USB Serial Port (COM133)  
 Please Hold "ON" to connect with the phone...  
 Connected to Phone.  
 CPU: MT6260_S0000 Ver: CB00 md:8000  
 Downloading Boot10 ...  
 Nor/SF Flash Type: [WINBOND] W25Q32BV  
 Nor Flash Code: 00400000(00EF0040)  
 Nor/SF Flash Size: 0x400000 Hex Bytes  
 Nand Flash Type: Nand_NEW_FF00  
 Nand Flash Code: 00000000  
 Nand Flash Size: 0x0 Hex Bytes  
 INT/EXT RAM Size: 0xFFFF0000+0x0  
 Formatting Nor Flash...  
 Format Start Addr: 0x3a4000, Size: 0x5000  
 >>Formatted OK.  

Microsoft RM-1035 (130) Format done in Miracle box Video:

Sponsored Links

8 comments:

  1. where is the link for the firmware RM-1035????

    ReplyDelete
  2. Flash done,and contact servise
    Help me please

    ReplyDelete
    Replies
    1. Flash with this file here Note : tick only "Firmware" and flash it with Miracle box

      Delete
  3. hi,

    give me Miracle box direct link..and also my phone is not detected by any recovery tool to proceed further because it is restarting and my keypad blinks and again restart if i connect to system

    provide Link for Miracle Box

    ReplyDelete
    Replies
    1. Install Nokia PC Suite for Driver and Miracle box latest update download from this link here

      Delete

If any problem just write down your message on below comment box