10 December 2015

Intex Aqua 3G Pro flash done with flash tool

Posted by
10 December 2015
Sponsored Links
Must Read:
This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Intex Aqua 3G Pro Firmware or flash tool download here

Required for flash:

  • Intex Aqua 3G Pro device with good battery charged
  • Intex Aqua 3G Pro tested firmware
  • SPD Upgrade Tool vR2.9.9015 flash tool
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Device battery must be charged up to 70% per
  • Intex Aqua 3G Pro tested firmware or flash tool download from above link
  • Extract to file in desktop or as you like path
  • Open SPD Upgrade Tool vR2.9.9015 folder and choose UpgradeDownload.exe file
  • Click on Firmware button and choose Intex_Aqua_3G_Pro_V08_Indian_20150516.pac file
  • Wait until read firmware (note : do not click on cancel button)
  • Click on Start Download button (button like as a play)
  • Press and hold Volume Up button and insert usb cable (note : must be working of all keys or usb socket)
  • Wait until full flash (note : do not unplug micro usb cable in to device or computer)
  • You are done

Intex Aqua 3G Pro flash done with flash tool screenshot:

Intex Aqua 3G Pro flash done with flash tool video:

Sponsored Links

10 comments:

  1. Replies
    1. what happen ? any error comes from pc when you try in flash just give me hint i will my best for that :)

      Delete
  2. my pc not detect SPD device, i already tri install driver but not working please give me idea

    ReplyDelete
  3. pac file can't be insert in SPD upgrade tool

    ReplyDelete
  4. Replies
    1. Try with this tool here must be enable USB debugging

      Delete

If any problem just write down your message on below comment box