Redmi a7 pro / poco c81 pro users commonly run into the phone hanging on the boot animation and never reaching the home screen, especially after flashing a custom ROM. The stock ROM below is a direct fix for this. This build is made specifically for the Unisoc T8300 chipset, so confirm your exact model number (e.g. Global - 25128RN17A, 25128RN17Y | Latin America - 25128RN17L) before downloading.
If your Redmi a7 pro / poco c81 pro (codename: arctic) is stuck on the Mi logo, stuck in a bootloop, showing a dead boot screen, or you flashed a custom ROM and now want to get back to MIUI/HyperOS, you're in the right place. Below you'll find every available fastboot and recovery firmware version for this device, along with working download servers and a flashing walkthrough that doesn't skip steps.
One thing worth knowing upfront — fastboot ROM flashing wipes the phone completely, so only go that route if you're fine starting fresh. For a lighter repair that doesn't touch your files, the recovery ROM is normally the better choice.
Device Overview
| Brand | Xiaomi |
|---|---|
| Device | Redmi a7 pro / poco c81 pro |
| Model Number | Global - 25128RN17A, 25128RN17Y | Latin America - 25128RN17L |
| Codename | arctic |
| Chipset | Unisoc T8300 |
| OS Version | HyperOS 3.0 |
| Storage Variants | 64GB / 128GB |
| RAM Variants | 4GB |
| Approx. Total Size | 7.6 GB |
| Recommended Tool | Mi Flash Tool |
Fastboot vs Recovery ROM — Which One Do You Need?
It's easy to grab the wrong file here, so let's keep it simple. A fastboot ROM is the full firmware set, flashed via Mi Flash Tool on a computer — it resets the device entirely, which is exactly why it works for bootloops, dead boot, or a phone stuck at the logo. A recovery ROM instead runs from the phone's own Mi Recovery menu, and is meant for updating, downgrading, or repairing software without wiping your data (backing up first is still a smart move).
🔹 Fastboot ROM
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi a7 pro / poco c81 pro | arctic | Fastboot ROM | OS3.0.3.0.WBVINXM | 16 | 7.6 GB | 2026-06-02 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi a7 pro / poco c81 pro | arctic | Fastboot ROM | OS3.0.2.0.WBVINXM | 16 | 7.6 GB | 2026-03-23 |
🔹 Recovery ROM
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi a7 pro / poco c81 pro | arctic | Recovery ROM | OS3.0.4.0.WBVINXM | 16 | 5.6 GB | 2026-07-21 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi a7 pro / poco c81 pro | arctic | Recovery ROM | OS3.0.3.0.WBVINXM | 16 | 5.6 GB | 2026-06-11 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi a7 pro / poco c81 pro | arctic | Recovery ROM | OS3.0.2.0.WBVINXM | 16 | 5.4 GB | 2026-04-24 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Redmi a7 pro / poco c81 pro | arctic | Recovery ROM | OS3.0.1.0.WBVINXM | 16 | 5.4 GB | 2026-04-24 |
Tools You'll Need
Before flashing, make sure you have the flashing tool and the correct USB driver installed on your PC — most flashing failures actually come down to a missing or outdated driver rather than the firmware itself.
How to Flash Redmi a7 pro / poco c81 pro Using Mi Flash Tool
- Download the fastboot ROM and extract it fully — don't skip extraction, Mi Flash Tool won't read a zipped folder.
- Install Mi Flash Tool from the link above and open it.
- Power off the phone, then hold Volume Down + Power together to boot into Fastboot mode.
- Connect the phone to your PC using a good-quality USB cable — cheap cables are a common cause of connection drops mid-flash.
- In Mi Flash Tool, click "Select" and point it to the extracted firmware folder.
- Once the COM port is detected, hit "Flash" and let it run — don't disconnect the phone during this step.
- The phone will reboot on its own once flashing finishes. First boot can take a few minutes longer than usual, so give it time.
Common Flashing Errors and How to Fix Them
"Auth file needed" — this usually shows up when the connected Mi account isn't authorized for flashing. You'll need an authorized account, or a test-point based flash for unlocked devices.
"COM port not detected" — almost always a driver issue. Install the Qualcomm/MediaTek USB driver from the link above, then put the phone back into EDL or Fastboot mode and try again.
"Flashing failed" partway through — try a different USB cable or port first; if that doesn't help, re-extract the firmware in case a file got corrupted during download.
Frequently Asked Questions
Is this firmware official?
Yes, these are unmodified stock builds pulled directly from Xiaomi's own update servers.
Will flashing delete my data?
Fastboot flashing wipes the device, so back up anything important first. Recovery flashing is less destructive but a backup is still a good idea.
My model number doesn't match exactly — can I still use this?
Make sure the codename matches arctic exactly, as listed above. Using firmware meant for a different variant or region can brick the device.
0 Comments
Write Your Problem in the Below Comment Box