Infinix 40i Charging Error Solution | Easy Fix Guide

Are you facing the Infinix 40i charging error problem? Many Infinix 40i users experience an issue where the phone shows “Error! Please plug out charger” or stops charging even when connected. Don’t worry, in this guide we will explain the reason behind the charging error and how you can fix it step by step.

Common Symptoms of Charging Error in Infinix 40i

• Phone shows charging but percentage does not increase.
• Error message: “Please plug out charger” with a red warning sign.
• Charging stops automatically after a few seconds.

Causes of Infinix 40i Charging Error

The issue is usually caused by:

• Faulty charging IC or components on the motherboard.
• Broken or weak connection in charging circuit.
• Error in charging line filter or missing jumper connection.

Image Credit : Arshad Mobile

Infinix 40i Charging Error Solution (Step by Step)

According to the image above, here’s the tested solution:

1. Check Charging Connector:

   • Clean the charging port properly.

   • Replace the connector if pins are damaged.

2. Inspect Motherboard Components:

   • Open the back panel and check the charging section.

   • Look at the marked area in the image (circled in red).

3. Apply Jumper Solution:

   • If the circuit line is broken, use a jumper wire at the indicated point (Jampar).

   • This will restore proper current flow to the charging IC.

4. Reassemble & Test:

• After repairing, reassemble the phone.
• Connect the charger and check if charging is stable.

Final Words

By following this guide, you can easily fix the Infinix 40i charging error. If you are not confident in doing hardware repairs, it is best to consult a professional mobile technician.

SEO Keywords

• Infinix 40i charging error solution
• Infinix 40i charging problem fix
• Infinix 40i not charging repair
• Infinix 40i error please plug out charger
• Infinix 40i charging jumper solution
• Infinix 40i charging ways