06 September 2021

Samsung M11 (M115F) Frp Unlock in UMT

Posted by
06 September 2021
Sponsored Links

If want to Samsung M11 (M115F) Frp Unlock Android 11 UMT then you can try to remove it by your self have to charge a battery with any charger and charged it by 90%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. 

This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

Samsung M11 (M115F) Frp Bypass Android 11 UMT you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working. If a battery is not charged, your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Required :

  • Samsung M11 (M115F) with Good Charge Battery
  • UMT Key
  • prog_emmc_firehose_8937_ddr
  • Qualcomm USB Driver
  • Micro USB Cable
  • Computer or Laptop

Procedure :

  • First Install Qualcomm USB Driver
  • Open UMT QcFire v6.3 (If you Use Down Version then you need to loader)
  • Go to Read & Tools Tab
  • Click on Reset FRP
Samsung M11 (M115F) Frp Unlock in UMT

  • Now Put Phone on EDL Mode Using Below Image of Samsung M11 (M115F) Edl Test Point Picture There Highlight Two Point Just Short it using Tweezer

Credit : Tuser Hape
Vivo Y11 2019 (PD1930F) EDL Testpoint

  • Wait Until Completed
Samsung M11 (M115F) Frp Unlock in UMT

UMT v6.3 Logs : 

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM110)
Driver Info : Qualcomm Incorporated, qcusbser.sys,
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 412796CDA9753F93CE68BCC07BCC2D2B4FCA4F7D17CC3E1790 7D02EBABFA07EC
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_036]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : QP1A.190711.020.M115FXXU1ATG2, M115FXXU1ATG2 [Fri Jul 3 02:00:25 KST 2020]
Android Ver. : 10
Patch Level : 2020-07-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.3
Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box