21 February 2018

Intex Aqua Pride FRP Lock done with SP Flash tool

Posted by
21 February 2018
Sponsored Links
Intex Aqua Pride in that problems of FRP Lock, Google Lock and want to bypass it so don't worry you can easy done using this guide cause tested by me without any risk if your device in hard ware issue like shorting then can be risky everyone please be carefully use who follow this method for reset FRP lock required all are in below links that must be have without it not possible to reset frp lock this is for free every one can use without any boxes must read below description
Intex Aqua Pride want to reset FRP Lock , can try to repair it by. have to charge a battery with any charger and charged it by 91%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
Download Links
Intex Aqua Pride Code file for FRP

Intex Aqua Pride FRP tool

Intex Aqua Pride USB Driver and Flash tool

Requisite

  • Intex Aqua Pride Android Phone with Good battery charged do not try with low battery
  • Intex Aqua Pride Format code
  • Intex Aqua Pride FRP reset tool
  • Intex Aqua Pride USB Driver
  • Micro USB Cable with Good quality

    Procedure

    • Download all are files from the above links if link not working just leave your comment on below comment box
    • Install WinRAR software in your computer or laptop for extract downloaded links
    • Extract all file and paste to desktop
    • First Install Lenovo USB Driver and after that Reboot (Restart) Computer
    • Open SP flash tool and load scatter file click on Scatter-loading button and choose MT6580_Android_scatter file from the Intex_Aqua_Pride FRP_By_GsmHelpful folder
    • Now Jump to Format Tab and click to Manual Format flash
    • Copy 0x4FA0000 code and paste to Begin Address[HEX]
    • Copy 0x100000 code and paste to Format Length[HEX]
    • Now click on Start button
    • Turn off Mobile wait 5 seconds
    • Just Insert USB cable to device then automatically detect phone with SP Flash tool, if not detect phone then try Press and hold Volume Up and Insert USB cable OR Press and hold Volume Down and Insert USB Cable
    • Wait until complete the process
    Intex Aqua Pride Success screenshot:
    Sponsored Links

    No comments:

    Post a Comment

    If any problem just write down your message on below comment box