-->
Friday, November 04, 2016

How to Flash or Fix Software Problems Redmi 3S Prime 2016032

Posted by
Friday, November 04, 2016
Sponsored Links
Redmi 3S Prime few Specification:
Android OS, version 6.0.1 (Marshmallow), Chipset : Qualcomm MSM8937 Snapdragon 430, CPU : Octa-core 1.4 GHz Cortex-A53, Card slot microSD, up to 256 GB (uses SIM 2 slot), Internal : 32-GB, 3-GB RAM

About this method:
This is tested guide if any one have query using this guide just leave your comment on below comment box I will soon fix it if possible in this device bootloader locked so you can't flash or fix software problems solve via fastboot mode can done only in EDL mode can reset also mi account in this guide all gave description which notes using before read also reason of not detected device with Computer or Laptop now let's god know about how to flash or fix software problems in Redmi 3S Prime Model 2016032 ?
Must Read before use:
If want to repair device, can try to repair it by. have to charge a battery with any charger and charged it by 97%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

You can use this method if you have the following errors:
This flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Reason of not detect phone with Computer or Laptop:
Redmi 3S Prime 2016032 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

Required for Redmi 3S Prime 2016032

  • Redmi 3S Prime 2016032 device with good battery charged, do not try with low battery
  • Redmi 3S Prime 2016032 Stock ROM Firmware | Fastboot ROM | Recovery ROM
  • Redmi 3S Prime 2016032 Flash Tool | MiFlashSetup-Beta.zip
  • Xiaomi EDL Boot.bat file | Download
  • Redmi 3S Prime 2016032 USB Driver (for Flashing) | Download
  • Micro USB Cable with good quality
  • Computer or Laptop

Procedure Redmi 3S Prime 2016032

      • Download tested ROM or Flash tool from above link (if link not working then write down comment on below comment box)
      • Go to Firmware WinRAR and please rename to .tgz, if is .gz or tar
      • Extract to desktop both WinRAR (Note : Must your firmware folder in desktop)
      • Open C:\XiaoMi\XiaoMiFlash\ and choose XiaoMiFlash.exe file and open it
      • Click on Select button and choose Image folder from the desktop copied firmware (see below image)

          Note : Above Image for Example
          • Turn off device, Press the Volume Down + Power keys same time for entering Fastboot mode


          • Now Connect device and update driver go to My computer, Properties, Device Manager, Update driver from above link's
          • Open xiomi_edl_boot folder and choose xiomi_edl_boot.bat file and wait until process
          • Now click on Refresh button in XiaoMiFlash Tool, after you can see COM:10 or other on flash tool
          • Tick on clean all and lock (Note : if device cloud lock then you can use this option) otherwise choose another option
          • Click on Flash button and wait until finished the process, do not try to unplug while device in flashing mode
          • Congratulation you are done
          Sponsored Links

          6 comments:

          1. mi 3s prime modle no 2016032 flash done but phon not turn on it s daed plsss help how o ecovery this phone

            ReplyDelete
            Replies
            1. After Flash long pressing Power key until vibrate phone after that not start then charge battery many be low

              Delete
          2. I can't extract fastboot rom with win rar and 7 zip

            ReplyDelete
            Replies
            1. please rename to .tgz, if is .gz or tar after that you can extract it

              Delete
          3. 2016032 not booting into edl mode...it shows okay bt mobile restarts on normal mode

            ReplyDelete
            Replies
            1. For this use deep cable how to make this type cable follow this video : here

              Delete

          Write Your Problem in the Below Comment Box