-->
Tuesday, September 27, 2016

How to Fix Hang on Logo Xiaomi Redmi Note 2013121 with Flash Tool

Posted by
Tuesday, September 27, 2016
Sponsored Links
Xiaomi Redmi Note 2013121 few Specification:
OS : Android OS, v4.2 (Jelly Bean), Chipset : Mediatek MT6592, CPU : Octa-core 1.4/1.7 GHz Cortex-A7, Card slot : microSD, up to 32 GB, Internal : 8GB, RAM : 1/2 GB

Xiaomi Redmi Note in MTK CPU and that device it's simple way to flash or upgrade when in to be software related problem more impotent of which type issues ? check below description there full guide and also when you can use ? device not detection what happen in that ? and i thing more no need to comment in any type problem you can easy understand reading this description everyone must read all carefully after try to following step by step if any query using this guide just leave comment in below comment box I will soon fix it if possible.
If device not detect with computer or Laptop just following below:
Xiaomi Redmi Note 2013121 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working. if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try.

You can use this method when in device below type problems
This flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.

Must read before use:
If want to repair device, can try to repair it by. have to charge a battery with any charger and charged it by 96%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by  own. do it at your own risk as we don't take any responsibility if a device is damaged

Requisite for Xiaomi Redmi Note

  • Xiaomi Redmi Note device with good battery charged, do not try with low battery
  • Xiaomi Redmi Note Stock ROM Firmware Download | Mirror | Mirror 2 | Tested Firmware (note : uncheck preloader after that try to download)
  • Xiaomi Redmi Note Flash Tool | Download
  • Xiaomi Redmi Note USB (Flashing) Driver | Download
  • Micro USB Cable with Good Quality
  • Computer or Laptop

Procedure for Xiaomi Redmi Note

  • Install Winrar Software in your Computer or Laptop, already installed then ignore
  • Download required for flash from the above link, if link dead or another issue just leave your comment on below comment box i will soon fix it if possible
  • Extract to as you like path better is desktop for easy understanding from the WinRAR software
  • Open SP Flash Tool folder and choose flash_tool.exe file and open it
  • Choose Click Scatter-loading button and choose MT6592_Android_scatter.txt file from the Redmi-Note-unbrick\Sysem-Image path
  • Last click on Download button and Just Insert USB Cable to device and wait until driver installing if driver not take auto then manual update from the above link's driver
  • If device dead or not detect then try with Volume UP button and Insert USB cable (Note: you can use Volume Down button also for detect not working Up key)
  • Wait until finished process, do not try unplug device while in flashing mode
  • Congrats you are done
Xiaomi Redmi Note 2013121 Flash done Screenshot:
Sponsored Links

40 comments:

  1. dear, i have Xiaomi Redmi Note 2013121 model ist it was hang on mi logo now it is dead after flash, now tell me how to resurrect it. need full procedure..thanx

    ReplyDelete
    Replies
    1. no, now it is dead what will be procedure to resurrect it.i flashed it with this ( lcsh92_wet_jb9_global_images_JHDMIBH38.0_4.2_in_c3ec538a7e_3.tar ).with sp tool .

      Delete
    2. Try with another firmware if device dead possible to live using this guide

      Delete
  2. yes i did but problem remains same.unit is still dead sp tool shown error
    "Brom error "
    chk this img.
    https://postimg.cc/image/i4eb39fnj/

    ReplyDelete
    Replies
    1. i flashed it with different versions still dead .flashing complete with out any error .any idea how to solve this kind of problem.

      Delete
    2. now it shows plug in & out continuously.

      Delete
    3. Give me Properly version which is open behind cover to device take out battery there to be model number also with s/w version give me

      Delete
    4. Try Press and hold Volume Up OR Down button and Insert USB cable

      Delete
    5. i used the same ver that u have used for flashing in ur flashing screen shot.

      Delete
    6. i used many firmware for flashing but no luck & i also used the same version firmware that u mentioned in ur post check ur own screen shot.if u have more effective version for my xiaomi redmi note model 2013121 then give me link or if u have any alternate solution for the unit then tell me thanx for supporting.

      Delete
    7. After Flash done what happen in device when you Turn on ?

      Delete
    8. no response from the unit .simply dead just it takes flashing.

      Delete
    9. When you connect dead device then which driver take pc ?

      Delete
    10. now i flashed with miracle box with this firmware : (MT6592__Xiaomi__HM_NOTE_1W__lcsh92_wet_jb9__4.4.2__ALPS.KK1.MP1.V2.46)
      set i now dead before it was hang on mi logo.

      Set MediaTek PreLoader USB VCOM Port (COM6)
      Please Hold "ON" to connect with the phone...
      Connected to Phone.
      CPU: MT6592 SW:0000 Ver: CA00
      Downloading Boot8 ...
      EMMC Size: 0x01D2000000
      Flash Type: EMMC
      INT/EXT RAM Size: 0x0+0x0
      Writing(Nand/eMMC)...
      Writing MBR
      Writing EBR1
      Writing UBOOT
      Writing BOOTIMG
      Writing RECOVERY
      Writing SEC_RO
      Writing LOGO
      Writing ANDROID
      Writing CACHE
      Writing USRDATA
      Checking Sum...
      Write Done.
      >>Total time: 2 mins 52 s

      Delete
    11. two driver with connect/disconnect tone.on 1st tone it shows ( MTK USB PORT )& on 2nd tone it shows( MEDIA TEK PRELOADER USB VCOM PORT ) WITH OR WITHOUT BATTERY.IT IS THE CURRENT STATUS BRO.

      Delete
    12. Both driver working in flashing and can't try with without battery

      Delete
    13. i know that,but here is the same question how can we Resurrect the unit.i need it's matchable rom.ON the back sticker it shows
      1.BRAND NAME = MI
      2.MODEL NAME = 2013121.
      there is no sw ver & hw ver on the back sticker.

      Delete
    14. already tried this 1(lcsh92_wet_jb9_global_images_JHDMIBH38.0_4.2_in_c3ec538a7e ) any other solution .one more thing i formatted unit with sp tool also.

      Delete
    15. Sorry for late reply did you try this firmware here ?

      Delete
    16. yeh i did that 1 also but no success.any other

      Delete
    17. I gave you two file it's tested but why your device not alive ?

      Delete
  3. Please Help Me Sir My Notebook And Xaiomi 2013121 Did Not Work USB Drvier But I Install Your USB Drivers But I Did No Get Successful And I Get A Error Message "USB Device Not Recognized" Please Help Me Sir Please

    ReplyDelete
    Replies
    1. USB Device not Recognized means two type to be issues 1. battery low 2. USB Socket problem

      Delete
  4. good, i already flashed but IMEI unknow.
    how to do IMEI? Thank

    ReplyDelete
  5. BROM ERROR :S_FT_ENABLE_DRAM_FAIL (4032) please help me

    ReplyDelete
    Replies
    1. First check in hardware which short cause will be dead try Press and hold Volume Up and Insert USB cable :)

      Delete
  6. my smartphone :
    HM NOTE 1W, Internal memory (16gb) after custome
    when i flash tool, with SP_Flash_Tool_v5.1712_Win,

    error storage type mismatch,
    "scatter storage HW_STORAGE_EMMC
    target storage type is HW_STORAGE_NAND"

    would u help me ??...

    thanks before.

    ReplyDelete
    Replies
    1. I think this is hardware issue :) say clearly what happen in phone ?

      Delete

Write Your Problem in the Below Comment Box