28 June 2016

How to Flash or Upgrade Intex Aqua A1 with SP Flash Tool ? (Tested)

Posted by
28 June 2016
Sponsored Links
This is simple way for flashing or upgrade in Intex Aqua A1 device because this is tested by me without any error, this method you can use without any box its done from flash tool its also available here, and impotent of must be installed phones driver, you can't flash or upgrade if not installed in your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try, you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on wifi connection, auto apk installing, auto gone balance, pattern lock, screen lock etc

This flash file tested by me without any error working well,  this is free for all who know about software in mobile, impotent for flashing first must check your micro USB cable if not good then you can't flash it so check micro USB cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, videos, notes, emails, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

If you want to repair your device, you can try to repair it by you.You have to charge your battery with any charger and charged it by 70%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, sd card or any other suitable devices. If you are doing by your own.do it at your own risk as we don't take any responsibility if your device is damaged

Required for Intex Aqua A1

  • Intex Aqua A1 handset with good battery charged, do not try with low battery
  • Intex Aqua A1 Stock ROM Firmware | Download here
  • Intex Aqua A1 Flash tool | Download here
  • Intex Aqua A1 USB Driver | Download here
  • Micro USB Cable with Good Quality
  • Computer or Laptop

Procedure for Intex Aqua A1

  • Take files of required for this method from the above link, if link dead or broke just leave your comment on below comment box i will soon fix it if possible
  • UnZip from WinZIP to anywhere you want from the ZIP, must be installed ZIP in your Computer or Laptop
  • Open SP Flash tool folder and select and open flash_tool.exe file
  • Click on Scatter-loading button and choose MT6572_Android_scatter.txt file from the Firmware folder
  • Now click on Download button, and Just Insert USB Cable to device
  • Wait until driver installing, if driver already installed in your Computer or Laptop then downloading start automatically
  • If device dead for detection Press and hold Volume Up button and Insert USB Cable
  • Wait until finished process, do not disconnect device while in flashing mode
  • Congratulation you are done
Intex Aqua A1 Flash done Screenshot:
Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box