01 June 2016

How to Flash Micromax Canvas Blaze Q400 with Flash tool ? OR Dead Solution (tested)

Posted by
01 June 2016
Sponsored Links
Micromax Canvas Blaze Q400 in FRP lock issue, when i try following procedure for that but not working means did not go to mode after I decide to full factory flash, I success using below procedure with requirement then I put here, and this method totally tested by me without any error but before use following requirement that is impotent for this solve, after successfully flash done you can easily put in mode and after flash done many issue will be solve like auto apk installed, auto data internet connection turn on, automatically wi-fi started, this is use before must be charged device battery, must be working well micro USB cable, in cable many to be issues like some cable which in market device connect or not connect that is normal USB cable but use high quality cable easily can flash or data backup or etc

Also check phone USB Socket its working well for this guide, when considering such a message like USB not recognized this type error issue in Micro USB cable, must be installed USB driver in Laptop if use that but no need to personal computer or in both must be working well USB port without that you can't flash or upgrade.

This guide use when in phone problems of hang on logo, restarting, pattern lock, FRP lock, screen lock, password forgot etc software related, before use first backup data like contacts, photos, videos, notes, backup apk, email etc, this is factory stock ROM firmware can't save data if not take backup

Download Link
Micromax Canvas Blaze Q400 Flash file (Stock ROM)

Micromax Canvas Blaze Q400 USB Driver

Micromax Canvas Blaze Q400 flash tool


  • Micromax Canvas Blaze Q400 device with 80% charged battery, please do not try with low battery, if stop between flashing device will be dead or other problems be carefully
  • Micromax Canvas Blaze Q400 Stock ROM Firmware its must be working well means not to be corrupted 
  • Micromax Canvas Blaze Q400 Flash tool
  • Micromax Canvas Blaze Q400 USB Driver
  • Micro USB cable must be good working and don't use low quality cable
  • Computer or Laptop

Formality :

  • Download which requirement from above link, if link not just leave comment on below comment box i will soon update it
  • Install WinZip software to computer or laptop because need it software for Extract, here stock ROM, Flash tool, Driver All are in archive
  • Extract to desktop or as you like path, you can put any path no required to desktop
  • Open Flash tool folder and choose FlashTool.exe file open it
  • Click on Firmware button like (...) three dot and choose apollo-debug-V28-signed....Zip file
  • Now Press and hold Volume Up + Down and Insert USB cable
  • If device Dead just Insert USB cable and Starting download automatically
  • Update Driver from the device Manager (Manual)
  • After Update Driver downloading start automatically wait until, do not unplug while device in flashing mode
  • Congratulation you are done
Micromax Canvas Blaze Q400 Success Flash Screenshot:

Micromax Canvas Blaze Q400 Flash done Video:
Sponsored Links


If any problem just write down your message on below comment box