29 June 2016

How to Flash Lava Flair E3 with ResearchDownload 2.9.7006 Flash Tool ? (Tested)

Posted by
29 June 2016
Sponsored Links
Lava Flair E3 Android device and this guide for software related issues solution which is hang on logo, restarting, auto turn on internet connection, auto turn on wifi connection, auto apk installing, auto gone balance, pattern lock, screen lock etc these type to be software related problem and you can use this method for above solution. Lava Flair E3 in any type issue software related you can easy solve using this method and this is for everyone who new fresher technician or experience technician in android software related, before use remember of must be working well all are required which you can see in this method it below to be mention, different to be error when you try to flash or upgrade first of USB not recognized this error possible when micro USB not working, battery not charged, phone USB socket not working properly so if you fail with this method just write down your comment on below comment box i will soon possible to fix it, first take backup into device if live otherwise dead you can't take backup, this method use when device in dead condition also but must be in software problem in hardware device not be live.

If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 70%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, SD card or any other suitable devices. If you are doing by your own.do it at your own risk as we don't take any responsibility if your device is damaged

Requirement for Lava Flair E3


  • Lava Flair E3 handset with good battery charged, do not try with low battery
  • Lava Flair E3 Stock ROM Firmware | Download here
  • Lava Flair E3 Flash Tool | Download here
  • Lava Flair E3 USB (Flashing) Driver | Download here
  • Micro USB Cable with Good Quality
  • Computer or Laptop

Flash OR Upgrade Method for Lava Flair E3



  • First take all are required files from the above link, if link dead or broke just leave your comment on below comment box i will soon fix it
  • Install WinZip Software in Your Computer or Laptop if not installed
  • Extract to anywhere you want from the WinZip
  • Open ResearchDownload 2.9.7006 folder and choose ResearchDownload.exe file and open it
  • Click on Firmware button and choose Lava_FlairE3_SW10_20150801_V270_R36989.pac file
  • Click on Download button then Press and hold Volume Down button and Insert USB Cable, Wait until driver installing if already installed then downloading start automatically
  • Wait until finished process, do not unplug while device in flashing mode
  • After finished process, unplug device and take out battery insert battery into device and try to start device i hope you are done Congratulation
Lava Flair E3 Flash done Screenshot:
Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box