-->
Thursday, June 23, 2016

How to Flash iBall Prince 1.8G Dual SIM with Flash tool ? (Tested)

Posted by
Thursday, June 23, 2016
Sponsored Links
This is feature phone and you can use this guide when phone in problem of phone lock, hang on logo, restarting these type, before use this guide must be charged phone battery and do not try with low battery, must be installed USB Driver in your computer or laptop, check also USB Socket some time what happen device not detect with flash tool because there no any installed driver, check Micro USB Cable this is also must be working well, in this phone issue of when Insert SIM card phone turn off automatically when i try flash with this file its working good.

If any contact in phone first backup because this is factory flash file you can't save any type data if device line make sure backup after try following this guide, first read all carefully full method after try to following step by step and here also mention which need for flash in requirement and If you are doing by your own.do it at your own risk as we don't take any responsibility if your device is damaged

Requirement for iBall Prince 1.8G

  • iBall Prince phone with up to 70% battery charged
  • iBall Prince Flash file | Download here
  • iBall Prince Flash tool | Download here
  • iBall Prince USB Driver | Download here
  • Good Quality Micro USB Cable
  • Computer or Laptop

Procedure for iBall Prince 1.8G

  • Download all files from the above link, if link not working just leave your comment on below comment box i will soon fix it if possible
  • Installing WinZip in you computer or laptop for extract file without it can't you flash so that is required first
  • Extract to Desktop or as you like path from the WinZip
  • Open SPD Upgrade Tool vR2.9.9015 folder and choose UpgradeDownload.exe file open it
  • Click on Flash file button and choose iBall_Prince 1.8G_S590_ZNT_0B2_V12.0_20141205.pac file from the iBall_Prince 1.8G_S590_ZNT_0B2_V12.0_20141205 folder
  • Now click on Download button (button like are play)
  • Press and hold Center key and Insert USB Cable, and wait until driver installing
  • After Installed Driver flashing starting automatically, do not try to unplug while device in flashing mode and wait until finished process
  • Congratulation you are done
 iBall Prince 1.8G Dual SIM Flash done Screenshot:
 
Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box