21 June 2016

Intex Aqua ACE FRP (Google Account Bypass) done with Miracle box (Tested)

Posted by
21 June 2016
Sponsored Links
Before use this guide must your device battery charged up to 80%, and also check USB Socket must be working well, also check Micro USB Cable its must be good quality some market cables are not working properly so this is impotent for that, first take backup in your device like contacts, videos, photos, emails, notes etc because this will Factory Reset then you can't save any data this is also impotent for customer, if data in SD Card so don't worry this is not remove but first take out SD Card from the phone after try to following this method

If USB not working some hits like USB not recognized this issue make two type first of Micro USB Cable or handset USB Socket not working, Second of if battery low then that error comes on the computer display, some time USB line clear after that USB not working what happen ? here i give you suggest check USB Socket there waste is to be filled clean that after try to connect device will be connected

This guide was done in Miracle box, if you following this then must be have Miracle box otherwise option should be in other chines boxes which check below in Miracle box screenshot and also must installed USB driver in your computer or laptop without that you can't connect device with miracle box, you don't have driver you can download from the below link not let's go how to FRP Reset in Intex Aqua ACE ? let's see

Required for Intex Aqua ACE

  • Intex Aqua ACE Phone with Good battery charged, and do not try with low battery
  • Intex Aqua ACE USB Driver | Download here
  • Miracle box
  • Micro USB Cable (Good Quality)
  • Computer or Laptop

Procedure for Intex Aqua ACE

  • First Installed driver in your computer or laptop if not installed from the above link, if link not working just leave your comment on below comment box
  • Open Miracle box Go to MTK Tab and choose Unlock/Fix tab
  • Choose Clear Setting/Frp option
  • Choose Boot : 8th Boot(MT65xx & MT67XX/8127) Option
  • Tick on USB Cable option
  • Click on Start Button and Insert USB Cable into device, wait until driver installing
  • If device not detect then use Press and hold Volume UP button and Insert USB Cable
  • Wait until finish process, do not try to unplug while device in processing mode
  • After done job when you Starting device then wait to 15 to 20 Minutes
  • Congratulation you are done
Intex Aqua ACE Frp Reset Done Screenshot:
Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box