-->
Monday, March 21, 2016

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool (tested)

Posted by
Monday, March 21, 2016
Sponsored Links
The Samsung Galaxy J7 (J700F) is a popular mid-range smartphone that offers a blend of functionality and affordability. However, like any electronic device, it may encounter software issues that require a reinstallation of the operating system. Flashing the Galaxy J7 using Odin Flash Tool can help resolve such issues and breathe new life into the device. In this guide, we'll walk you through the process of flashing the Samsung Galaxy J7 (J700F) using the Odin Flash Tool.

What is Flashing?

Flashing refers to the process of reinstalling the operating system software on a device. It can be necessary if the device is experiencing software-related problems such as boot loops, crashes, or if you want to revert to the stock firmware after installing a custom ROM. Odin Flash Tool is a Windows-based utility developed by Samsung that allows users to flash firmware, kernels, and other system components onto Samsung Galaxy devices.

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool (tested)


Prerequisites:

Before you begin the flashing process, ensure you have the following:
  1. Samsung Galaxy J7 (J700F) device
  2. Windows PC
  3. USB data cable
  4. Latest Samsung USB drivers installed on your PC
  5. Odin Flash Tool (downloadable from trusted sources)
  6. Stock firmware for your specific Galaxy J7 model (ensure it's compatible with your device)

Steps to Flash Samsung Galaxy J7 (J700F) Using Odin:

Step 1: Download Stock Firmware
  • Visit a trusted source and download the stock firmware for your Samsung Galaxy J7 (J700F) model. Ensure that you download the correct firmware version to avoid compatibility issues.
Step 2: Install Odin Flash Tool
  • Download Odin Flash Tool on your Windows PC and extract the files from the downloaded ZIP archive. Run the Odin executable file to launch the tool.
Step 3: Boot Galaxy J7 into Download Mode
  • Power off your Galaxy J7 device.
  • Press and hold the Volume Down, Home, and Power buttons simultaneously until you see a warning screen.
  • Press the Volume Up button to enter Download Mode.
Step 4: Connect Galaxy J7 to PC

Connect your Galaxy J7 to the PC using a USB data cable. Odin should recognize your device, indicated by the "Added!" message in the log window.

Step 5: Load Firmware in Odin
  • In Odin, click on the "AP" button and select the firmware file (with .tar or .tar.md5 extension) you downloaded earlier.
Step 7: Start Flashing Process
  • Double-check that only the "Auto Reboot" and "F. Reset Time" options are selected in Odin.
  • Click on the "Start" button to initiate the flashing process. This may take a few minutes, so be patient and do not disconnect the device during this time.
Step 8: Completion and Reboot
  • Once the flashing process is complete, you'll see a "PASS!" message in Odin, indicating successful flashing.
  • Your Galaxy J7 will automatically reboot. You can now disconnect it from the PC.
Conclusion:

Flashing the Samsung Galaxy J7 (J700F) using Odin Flash Tool can help resolve software-related issues and restore your device to its factory state. However, it's essential to follow the steps carefully and ensure you have the correct firmware to avoid any complications. By following this guide, you can breathe new life into your Galaxy J7 and enjoy a smoother user experience.

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool screenshot:

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool Video
Sponsored Links

43 comments:

  1. Will it work if I use the Galaxy J7 (J700H) variant phone? or not, because i want to change my J700H to J700F, will it work properly and with no known bugs?

    ReplyDelete
    Replies
    1. Both file to be different, and this stock ROM for only J700F, please be carefully

      Delete
  2. I have done whatever given above instructions it's not working any solution

    ReplyDelete
    Replies
    1. No need to video Press and hold Volume Down + Home + Power button for download mode, Insert USB Cable and flash device

      Delete
  3. hello sir please help me
    my j700f knox warranty void -1
    how to solve.

    ReplyDelete
    Replies
    1. If you use this procedure that working well but after flash i think warranty void

      Delete
    2. Odin engine v(ID:3.1100)..
      File analysis..
      SetupConnection..
      Initialzation..
      Set PIT file..
      DO NOT TURN OFF TARGET!!
      Get PIT for mapping..
      Firmware update start..
      SingleDownload.
      sboot.bin
      NAND Write Start!!
      param.bin
      FAIL!

      Complete(Write) operation failed.
      All threads completed. (succeed 0 / failed 1)


      in download mode: swrev.check fail.device:2 binary:1

      Delete
    3. Following this : first charge your battery up to 80%, dont use pit file and try again

      Delete
    4. Same here but device is 4 and binary 1
      What should i do sir

      Delete
    5. give me download mode screenshot I will give correct firmware for your device

      Delete
  4. Added!!
    Odin engine v(ID:3.1100)..
    File analysis..
    SetupConnection..
    Initialzation..
    Set PIT file..
    DO NOT TURN OFF TARGET!!
    Get PIT for mapping..
    Firmware update start..
    SingleDownload.
    sboot.bin
    NAND Write Start!!
    param.bin
    FAIL!

    Complete(Write) operation failed.
    All threads completed. (succeed 0 / failed 1)
    what can i do

    ReplyDelete
  5. i am using indian J7 phone. i have rooted my phone my now i am trying to install original stock rom its showing me that its failed.
    i tried your procedure too but your firmware showing me its failed....

    ReplyDelete
  6. Replies
    1. in your description there is information to choose 4 different files in Odin BL, AP, CP, CSC ...
      but in download link inside zip there is only one file
      J700FXXU1AOL1_J700FOLB1AOL1_J700FXXU1AOL2_HOME.tar.md5

      Delete
  7. Added!!
    Odin engine v(ID:3.1101)..
    File analysis..
    SetupConnection..
    Initialzation..
    Get PIT for mapping..
    Firmware update start..
    SingleDownload.
    sboot.bin
    NAND Write Start!!
    param.bin
    FAIL!

    Complete(Write) operation failed.
    All threads completed. (succeed 0 / failed 1)
    Removed!!

    SW REV. CHECK FAIL DEVICE: 3, BINARY; 1

    Any solution???

    ReplyDelete
  8. Can we upgrade mannually after following above procedure from phone

    ReplyDelete
    Replies
    1. Yes but this is Lollipop version if in device already marshmallow version this you should follow this link here

      Delete
  9. Bro your download link only AP file
    Where others files please give me link

    ReplyDelete
    Replies
    1. did you check in single of AP file try this one cause that also tested

      Delete
  10. Hi Sir, I tried but it's gets fail on Device 3 binary 2 . Please reply.

    ReplyDelete
  11. Sir , I want to downgrade my j700f (2015) to lollipop 5.1 . I checked my device binary. It's 3. But there is no lolipop firmware is available for binary 3. Please tell me any solution for this.

    ReplyDelete
  12. my model number is j700fxxu4bqc5 does this this firmware work for it?
    ty

    ReplyDelete
    Replies
    1. Give me Screenshot of Download mode, upload phone from this site here

      Delete

Write Your Problem in the Below Comment Box