20 March 2016

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool (tested)

Posted by
20 March 2016
Sponsored Links
When i try in FRP Reset then i use miracle box for that but not success and in that was problem of software issue so i use below firmware link then success and i can easy remove frp lock so if you have any type this device then you can use this tutorial because this is tested by me without any error was success but remember before use this tutorial first charged your device battery if low and try in flash then you will be device dead or other issue so please carefully use this tutorial i suggest first read all tutorial carefully after following step by step if any issue using this tutorial then just simple leave your comment on below comment box
This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
J700FXXU1AOFJ_OJV1AOFJ Download here
Odin3_v3.10.7 Download here


Required for flash:

  • Samsung J7 (J700F) device with good battery charged
  • Samsung J7 (J700F) tested flash file
  • Odin3_v3.10.7 Flash tool
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Download tested firmware or Odin flash tool from above link
  • Extract to both files to desktop or as you like path ( must be installed winrar software in your computer or laptop)
  • Open Odin3_v3.10.7 folder and choose Odin3 v3.10.7.exe file
  • Click on BL button and choose BL_J700FXXU1AOFJ_CL679261.....tar.md5 file
  • Click on AP button and choose AP_J700FXXU1AOFJ_CL679261.....tar.md5 file
  • Click on CP button and choose CP_J700FXXU1AOFJ_CL679261.....tar.md5 file
  • Click on CSC button and choose CSC_OJV_J700FOJV1AOFJ..........tar.md5 file
  • Turn Off device (if your device ON)
  • Press and hold Volume Down + Home + Power button for Download Mode
  • Insert usb cable into device (wait until driver installed)
  • Click on Start button
  • Wait until full installed Android system (note : do not try unplug when your device in download mode)
  • Congratulation you are done

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool screenshot:

Samsung Galaxy J7 (J700F) Flash done with Odin Flash tool Video
Sponsored Links

44 comments:

  1. Will it work if I use the Galaxy J7 (J700H) variant phone? or not, because i want to change my J700H to J700F, will it work properly and with no known bugs?

    ReplyDelete
    Replies
    1. Both file to be different, and this stock ROM for only J700F, please be carefully

      Delete
  2. I have done whatever given above instructions it's not working any solution

    ReplyDelete
    Replies
    1. flash before which condition in device ?

      Delete
    2. No need to video Press and hold Volume Down + Home + Power button for download mode, Insert USB Cable and flash device

      Delete
  3. hello sir please help me
    my j700f knox warranty void -1
    how to solve.

    ReplyDelete
    Replies
    1. If you use this procedure that working well but after flash i think warranty void

      Delete
    2. Odin engine v(ID:3.1100)..
      File analysis..
      SetupConnection..
      Initialzation..
      Set PIT file..
      DO NOT TURN OFF TARGET!!
      Get PIT for mapping..
      Firmware update start..
      SingleDownload.
      sboot.bin
      NAND Write Start!!
      param.bin
      FAIL!

      Complete(Write) operation failed.
      All threads completed. (succeed 0 / failed 1)


      in download mode: swrev.check fail.device:2 binary:1

      Delete
    3. Following this : first charge your battery up to 80%, dont use pit file and try again

      Delete
    4. Same here but device is 4 and binary 1
      What should i do sir

      Delete
    5. give me download mode screenshot I will give correct firmware for your device

      Delete
  4. Added!!
    Odin engine v(ID:3.1100)..
    File analysis..
    SetupConnection..
    Initialzation..
    Set PIT file..
    DO NOT TURN OFF TARGET!!
    Get PIT for mapping..
    Firmware update start..
    SingleDownload.
    sboot.bin
    NAND Write Start!!
    param.bin
    FAIL!

    Complete(Write) operation failed.
    All threads completed. (succeed 0 / failed 1)
    what can i do

    ReplyDelete
  5. i am using indian J7 phone. i have rooted my phone my now i am trying to install original stock rom its showing me that its failed.
    i tried your procedure too but your firmware showing me its failed....

    ReplyDelete
  6. there re no bl ap cp csc .tar.md5 files

    ReplyDelete
    Replies
    1. in your description there is information to choose 4 different files in Odin BL, AP, CP, CSC ...
      but in download link inside zip there is only one file
      J700FXXU1AOL1_J700FOLB1AOL1_J700FXXU1AOL2_HOME.tar.md5

      Delete
    2. Sorry for that Link has been updated :)

      Delete
  7. Added!!
    Odin engine v(ID:3.1101)..
    File analysis..
    SetupConnection..
    Initialzation..
    Get PIT for mapping..
    Firmware update start..
    SingleDownload.
    sboot.bin
    NAND Write Start!!
    param.bin
    FAIL!

    Complete(Write) operation failed.
    All threads completed. (succeed 0 / failed 1)
    Removed!!

    SW REV. CHECK FAIL DEVICE: 3, BINARY; 1

    Any solution???

    ReplyDelete
  8. Can we upgrade mannually after following above procedure from phone

    ReplyDelete
    Replies
    1. Yes but this is Lollipop version if in device already marshmallow version this you should follow this link here

      Delete
  9. "sw rev check fail device 3 binary 1"

    ReplyDelete
  10. Bro your download link only AP file
    Where others files please give me link

    ReplyDelete
    Replies
    1. did you check in single of AP file try this one cause that also tested

      Delete
  11. Hi Sir, I tried but it's gets fail on Device 3 binary 2 . Please reply.

    ReplyDelete
  12. Sir , I want to downgrade my j700f (2015) to lollipop 5.1 . I checked my device binary. It's 3. But there is no lolipop firmware is available for binary 3. Please tell me any solution for this.

    ReplyDelete
  13. my model number is j700fxxu4bqc5 does this this firmware work for it?
    ty

    ReplyDelete
    Replies
    1. Give me Screenshot of Download mode, upload phone from this site here

      Delete

If any problem just write down your message on below comment box