-->
Tuesday, March 08, 2016

Micromax Canvas Blaze 4G Q400 FRP Reset done without any box

Posted by
Tuesday, March 08, 2016
Sponsored Links

This procedure in no need to any boxes or flashing just few minute you can done this job but need to must installed driver in your computer or laptop because without driver you can't done this job i suggest you before use this procedure first read all tutorial carefully after that following step by step and this content it's very easy to understand because we are thing all are better understand without any issue because here not all are master visit this site but everyone visit who master or fresher technician this procedure not yet tested by me but i put here because this is tricks from Micromax service center must check your device USB socket if any issue also check computer or laptop USB port also check micro USB cable if any problem i mentioned then you can't done this job so please carefully following this tutorial

Required for FRP Reset:


  • Micromax Canvas Blaze 4G Q400 device with good battery charged
  • Driver download here
  • Micro USB cable
  • Computer or Laptop

Procedure:


  • Turn off device with device on
  • Press and hold Volume Down + Power For Fastboot Mode
  • Insert usb cable to device
  • Now go to RUN and type there cmd and then press Hit Enter key Shortcut key win.key + R
  • Put ADB Driver into desktop
  • Type : Cd desktop\adb_drivers then Hit Enter key
  • Type : Adb devices>fastboot oem unlock Hit Enter key
  • Type : Fastboot -i 0x2a96 erase config Hit Enter key
  • Type : Fastboot -i 0x2a96 reboot Hit Enter Key
  • After reboot device google id will reset
  • Congratulation you are done
Micromax Canvas Blaze 4G Q400 FRP Reset Done Screenshot
Sponsored Links

21 comments:

  1. Replies
    1. Jo aapke computer or adb driver installed kiya hai to adb path ki jaroorat nahi hai :) Must be enable usb debugging after you can use comment

      Delete
    2. bhai ab debugging enable kese kare phone to pura on hi nahi he

      Delete
    3. Press and hold Volume Down + Power button and connect device after following command using above tutorial :)

      Delete
  2. q400 v30 frp not opean plz riplay 9561233005

    ReplyDelete
    Replies
    1. This is for all type software version in Micromax Q400. Check usb socket or usb driver

      Delete
  3. Replies
    1. Brother for this solution just need to Drivers you can download from this post

      Delete
  4. sir i try all that you mention on this post but it cant unlock the bootloader it always shows an error like this
    FAILED (remote: unknown command)
    sir plz solve this problm

    ReplyDelete
    Replies
    1. First flash device from this Link after try to this method (tested)

      Delete
  5. C:\Documents and Settings\DHARAMA>ADB Driver
    'ADB' is not recognized as an internal or external command,
    operable program or batch file.


    ReplyDelete
    Replies
    1. Download this here and extract then right click with shift key choose open command windows here

      Delete

Write Your Problem in the Below Comment Box