15 March 2016

Huawei Y300-0100 Flash done with SD Card (tested)

Posted by
15 March 2016
Sponsored Links
Huawei Y300-0100 tutorial tested by me without any error in market two files available when i use general version then not success full update so i try to other file it was working well without any error and that success file in this post so you can easy download and try with good quality SD card but remember some here required for flash that must be working well if any in issue then you can't update it so carefully read all are tutorial after following step by step so let's go how to flash Huawei Y300-0100 android device with SD Card.

Huawei Y300-0100 flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro USB cable if not good then you can't flash it so check micro USB cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Huawei Y300-0100 Firmware | General Version
Huawei Y300-0100 Direct link | United Kingdom Channel

Required for update :

  • Huawei Y300-0100 device with good battery charged
  • Huawei Y300-0100 tested firmware
  • SD Card (must be good quality)
  • Computer or Laptop (for copy paste)

Procedure:

  • Download tested firmware from above link (if link dead or other issue just leave your comment on below comment box)
  • Extract to desktop or as you like path (must be installed winrar software in your PC)
  • Open Y300 firmware(Y300-0100,Android 4.1,Emotion UI,V100R001C479B197,United Kingdom Channel) folder
  • Copy dload folder and paste to SD Card
  • Turn off device if on
  • Insert SD Card into Huawei Y300-0100 device
  • Press and hold Volume Up + Down + Power then automatically updating process start
  • Wait until full process success
  • Congratulation you are done
Huawei Y300-0100 Flash done with SD Card video

Sponsored Links

43 comments:

  1. hellow...
    I follow your instruction ...the second last step i insert memory card and press and hold volume +,- and power botton
    after this procedure i saw this
    "UPDATE EXCEPTION EMMC is readonly, you can't update your system... plzz help me

    ReplyDelete
  2. Replies
    1. Sorry i don't understand what say actual ?

      Delete
  3. I did all steps. However, when I try to enter on download mode, there's a pink sreen.. What should I do?

    ReplyDelete
    Replies
    1. First full format SD Card, after copy dload file and paste into SD Card and try to update

      Delete
  4. Sir, I have done all procedure but it show's update failed. Please Help me.

    ReplyDelete
    Replies
    1. Must SD Card is Empty & Good Quality like Samsung first Format with 32fat paste file and try again

      Delete
  5. there's a malicious on this firmware i cant download it can give me another link please....?

    ReplyDelete
  6. Hi, I can use OTG cable or OTG USB flash drive apart from Micro SD card will be OK?

    ReplyDelete
    Replies
    1. I don't try with OTG Cable but working well using Micro SD Card

      Delete
  7. hello dear... i follow your instrction , after unpacking error show

    ReplyDelete
    Replies
    1. Which is use software ? if use WinRAR and getting error then just 7Zip for extract

      Delete
  8. Replies
    1. Use SD Card Quality follow this step 1. Format 2. copy dload folder only and try again

      Delete
  9. during updation when unpacking complete and step two begins the phone show update fail option..
    everything is ok ... sd card is orignal fat32 formated full empty only dload folger is copied..
    need help what to do next?????

    ReplyDelete
  10. Yes the another file worked for me .....
    Thanks

    ReplyDelete
    Replies
    1. Which is use Sd Card Card ? company ? use Samsung

      Delete
  11. The phone won't update. i've downloaded the file, format the sd card. only with the buttons volume up+down +power button the phone doesnt respond.
    Can you help me?
    phone is completly empty and back to basic (huawei y360-u61)

    ReplyDelete
    Replies
    1. Which try in device ? in this post mention that ? or you mention that ?

      Delete
  12. i use general verison of firmware .. i already use 8gb class 4 of micro sd card .. i already format that sd card .. but at 2/2 unpacking , its failed ..

    ReplyDelete
  13. update packges ext name error..installlation aborted..how to sloved plzz help

    ReplyDelete
  14. hello bro try to flash as shown above not working

    ReplyDelete
  15. it try it say update exception EMMC is readonly, you cant update your system

    ReplyDelete
  16. When I press vul+,- power button screen turned into pink colour..how to fix?

    ReplyDelete
  17. UPDATE EXCEPTION EMMC is readonly, you can't update your system... plzz help

    ReplyDelete
  18. my mobile shows pink screen after pressing volume up+down+power buttons...

    ReplyDelete

If any problem just write down your message on below comment box