-->
Thursday, March 10, 2016

HTC One Dual Sim 802W Flash done with HTC ARUWizard flash tool (tested)

Posted by
Thursday, March 10, 2016
Sponsored Links

In this device different flashing way because in this device different CID different version number so please carefully in htc very complicated flash system some device you can flash from flash tool and some device flashing via CMD command base if you want to flash custom rom so must need to unlock bootloader after you can flashing custom rom.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
HTC One Dual Sim 802W Firmware download here
HTC One Dual Sim 802W Driver Download here

Note : This is tutorial tested in 7.17.401.5 HTC__A07 firmware

Required for flash:

  • HTC One Dual Sim 802W device with good battery charged
  • HTC One Dual Sim 802W tested firmware
  • HTC One Dual Sim 802W Driver
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Download firmware or driver from above link (if link not working just leave your comment on below comment box)
  • Extract to desktop or as you like path (must be installed winrar software in your computer)
  • Turn off device if on
  • Press and hold Volume Down + Power button
  • Select Fastboot mode and Press Power buttonInsert Micro usb cable into device
  • Open ARUWizard.exe file
  • Wait until full install
  • After full flash device automatically reseting
  • Congratulation you are done

HTC One Dual Sim 802W Flash done with HTC ARUWizard flash tool screenshot:


HTC One Dual Sim 802W Flash done Video:

Sponsored Links

10 comments:

  1. i cann't able to go to the boot menu by my phone its acreen hang on logo of HTC .

    ReplyDelete
  2. My htc j one cant enter bootloader mode, because i was doing unfinished custom rom flashing and now it's stuck on htc logo only. Any solution?

    ReplyDelete
    Replies
    1. Must be installed HTC USB Driver without that you can't solve your problems

      Delete
    2. before flashing give me fastboot getvar allinfo about your device which stuck on logo

      Delete

Write Your Problem in the Below Comment Box