18 January 2016

Intex Aqua Star HD Flash done with Miracle box

Posted by
18 January 2016
Sponsored Links

Must Read:
This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Intex Aqua Star HD firmware or flash tool download

Required for flash:

  • Intex Aqua Star HD device with good battery charged
  • Intex Aqua Star HD firmware or flash tool (tested)
  • Miracle box (you can use other box)
  • Micro usb cable
  • Computer or Laptop


  • Take firmware or flash tool from above link (if link not working just write down comment on below comment box)
  • Extract to desktop or as you like path (must be installed winrar software in your computer or laptop)
  • Open Miracle box and go to MTK tab
  • Click on Write button
  • Choose correct boot option : 8th Boot(MT65xx & MT67xx/8127)
  • Click on Firmware button and choose MT6582_Android_scatter.txt file
  • Click on Start button
  • Press and hold Volume Up button and insert usb cable (must be working well device key or micro usb cable)
  • Wait until driver install, if driver installed in your computer or laptop then downloading automatically start in to device
  • Wait until full install android os (do not disconnect device while flashing process)
  • You are done
Intex Aqua Star HD Flash done with Miracle box screenshot:

Intex Aqua Star HD Flash done with Miracle box video :

Intex Star Hd Flash done with Miracle box Logs:
  Definition Applied  
  1. Power Off Phone , Remove Battery, Insert Battery Back  
  2. Insert USB cable. In some cases Required Hold BootKey  
  3. Use Miracle Boot Key In cases Boot key not Find  
  4. Battery Should be Charged more then 50%  
  Waiting for USB Port...  
  Set MediaTek PreLoader USB VCOM (Android) (COM3)  
  Please Hold "ON" to connect with the phone...  
  Connected to Phone.  
  CPU: MT6582 SW:0001 Ver: CB00  
  Downloading Boot8 ...  
  EMMC Size: 0x01D2000000  
  Flash Type: EMMC  
  INT/EXT RAM Size: 0x0+0x0  
  Writing MBR  
  Writing EBR1  
  Writing UBOOT  
  Writing BOOTIMG  
  Writing RECOVERY  
  Writing SEC_RO  
  Writing LOGO  
  Writing EBR2  
  Writing ANDROID  
  Writing CACHE  
  Writing USRDATA  
  Checking Sum...  
  Write Done.  
 >>Total time: 5 mins 21 s  
Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box