-->
Friday, November 13, 2015

Karbonn Titanium S5 plus Flash done with Flash tool

Posted by
Friday, November 13, 2015
Sponsored Links

Must Read:
Karbonn Titanium S5 plus flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in Remove Virus, pattern lock, hard reset, flashing, software update, update, format, reset, phone lock, sim lock, pattern reset, pin lock, flash, hang on logo, only logo solve, hang logo solution, hang problem, firmware update, pattern lock, pattern unlock, pattern reset, phone lock, phone reset, format, hang on logo done, sim lock, screen lock, screen unlock, pin lock, stuck on logo done, user name password id problem, fix unfortunately app has stopped, unfortunately app has stopped working, unfortunately app store has stopped, unfortunately apps has stopped, unfortunately your app has stopped, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Download Link
Karbonn Titanium S5 plus 4.2.009.P1.131118.7295MI01 Download here
Karbonn Titanium S5 plus Flash tool Download here

Required for flash:

  • Karbonn Titanium S5 plus device with battery charged
  • Karbonn Titanium S5 plus tested firmware
  • YGDP flash tool
  • Micro usb cable
  • Computer or Laptop

Procedure:

  • Download Firmware or Flash tool from above link
  • Install YGDP_Setup_V3.98_Assembly.exe
  • Check desktop there to be icon for YGDP flash tool open it


  • Write down password : 369 in Password box then click on Login button
  • Click on Config button and click on CPB file button and choose 4.2.009.P1.131118.7295MI01.CPB file

  • Click on Apply button wait until process
  • Now Click on Start button and Insert usb cable in device without battery then start automatically starting download and wait until full flash (see below image)

:: Video Tutorial ::

Sponsored Links

26 comments:

  1. Replies
    1. First brother in this blog not fake posts here all are posts tested by me :)

      Delete
  2. hello i am facing issue device is connecting with tool but not flashing the rom in it... help me

    ReplyDelete
    Replies
    1. Many reason of not flash device 1. USB driver not installed 2. USB Cable not working 3. Device USB Socket not working, i want to know from you where still arrive and you can't flashing or get any error

      Delete
  3. not moving ahead after its showig"entering downloading mode"

    ReplyDelete
  4. Replies
    1. 98% p akar error what issu hummmmmm

      Delete
    2. Charge your battery if charged or same issue i think eMMC problem means hardware issue may be

      Delete
  5. Bro...my mobile is getting connected and disconnected again... i m not able to flash rom help me...

    ReplyDelete
    Replies
    1. Check driver cause if once time connect device then flash tool starting flash until finished the job

      Delete
  6. Do we need to plug battery in device while starting from software. My mobile software hanging and i download and process as u suggested but software is not transfering by following above process pls help.

    ReplyDelete

Write Your Problem in the Below Comment Box