01 December 2015

Intex Aqua N4 Flash done with Flash tool

Posted by
01 December 2015
Sponsored Links

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Intex Aqua N4 Flash tool Download here

Intex Aqua N4 Firmware Download here

Required for flash:

1. Intex Aqua N4 device with good battery charged
2. Intex Aqua N4 Firmware or Flash tool
3. Micro usb cable
4. Computer or Laptop


1. Download tested firmware or flash tool from above link
2. Extract it to desktop or as you like path
3. Open SP_Flash_Tool_v5.1343.01 folder and choose flash_tool.exe file
4. Click on Scatter-loading button and choose MT6582_Android_scatter.txt file from Aqua N4 folder
5. Click on Download button or shortcut key F9
6. Press and hold Volume Up button and insert usb cable
7. Wait until full flash
8. You are done

Intex Aqua N4 Flash done with flash tool screenshot:

Note : If any problem when using this tutorial then leave your comment on below comment box.
Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box