-->
Saturday, November 21, 2015

HTC Desire 526g+ MT6592 Stock Firmware + Guide

Posted by
Saturday, November 21, 2015
Sponsored Links
HTC Desire 526g+ MT6592 Stock Firmware 

HTC Desire 526g+ MT6592 flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in Remove Virus, pattern lock, hard reset, flashing, software update, update, format, reset, phone lock, sim lock, pattern reset, pin lock, flash, hang on logo, only logo solve, hang logo solution, hang problem, firmware update, pattern lock, pattern unlock, pattern reset, phone lock, phone reset, format, hang on logo done, sim lock, screen lock, screen unlock, pin lock, stuck on logo done, user name password id problem, fix unfortunately app has stopped, unfortunately app has stopped working, unfortunately app store has stopped, unfortunately apps has stopped, unfortunately your app has stopped, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.

If want to repair HTC Desire 526g+ MT6592 device, can try to repair it by your self have to charge a battery with any charger and charged it by 95%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged


Build: 1.05.720.1 Asia WWE


SD Card Flash File: here

Procedure via Recovery:
* Copy sd flash file to sdcard Boot into recovery mode update the zip.

Procedure via adb sideload:

* Copy sdcard file to adb folder rename the file as rom
* In recovery mode select update via adb
* Connect yur device nd run below dvn cmmd to flash yur device

adb sideload rom.zip

Procedure via Fastboot:

* Copy system-signed.img,userdata-sign & boot-signed-img files to adb
fastboot Driver folder nd run belw gvn cmmds.

fastboot flash system system-sign.img
fastboot flash boot boot-sign.img
fastboot flash userdata userdata-sign.img

Procedure via Spflash tool:

* Extract spflash tool file
* Load scatter file
* Press Download Hold both vol keys nd connect vit usb

Credit to Mr.: jamesjerss
Sponsored Links

61 comments:

  1. Replies
    1. Which one password brother ? there no any password for access link :)

      Delete
    2. Hello I have a htc desire 526g mt6582 died while flashing watched the video for james but the files are loaded on Mega been deleted Please download three files on the link to other Web sites, and send me a link ... I will send you a video link, and if have a Facebook or whatsapp Send me your number and you Thanks
      https://youtu.be/97a-t2sWx7w

      Delete
  2. in sp flash tool should we have to select firmware upgrade??

    ReplyDelete
    Replies
    1. Yes you can use sp flash tool :) just click on scatter-loading button and choose MT6592XXXX.txt file :)

      Delete
    2. My android is likely dead.it shows 'no command'.I cannot update any zip file from sd card.whenever i try this it says it needs cota upgrade.what is cota upgrade?? what should I do??

      Delete
    3. If your device is dead :) then download sp flash tool or correct firmware then flash it :)

      Delete
  3. I pressed the download botton , and den connected my phone . first a red bar say 100 percent , n den a purple bar. After dat i am getting an error code 4008.. Please help me out .

    ReplyDelete
    Replies
    1. First that are use own risk :) because not yet flash this device so :) use different flash tool :)

      Delete
    2. I am using the latest version . v5.1532

      Delete
    3. After downloading about 50%, error 4008 appears.!! What to do.? Please help..!

      Delete
  4. Replies
    1. Which one password you asking here no need password for flashing or extracting from winrar :)

      Delete
  5. My HTC desire 526 g plus function like dead recovery mode and fastboot mode not working now when I power on my device nothing happen and when I going like volume up button with power button nothing happen then when I plug to charge my device light glow and showing HTC logo powered by android after that it switch off then again light up and show HTC logo powered by android written and again repeat as same what will I do ?please help sir.

    ReplyDelete
    Replies
    1. Following last procedure :) which is flash via sp flash tool :)

      Delete
  6. my cell is getting hang on htc logo........plz tell me what i do for solve that problem

    ReplyDelete
  7. SD Card Flash File is not downloading. What to do? Can you please guide me......

    ReplyDelete
    Replies
    1. Use sp flash tool this is tutorial not this model but it's hint SEE HERE

      Delete
  8. Hai. Those links are not opening. Please give me another link for download. Please

    ReplyDelete
  9. Please give another download links if any. My phone is dead ;(

    ReplyDelete
    Replies
    1. If your device dead in software issue then you can live using this tutorial but remember try again using perfect software version and check MT6XXX

      Delete
  10. sir i am not understand how to flash adb update via sdcard.i have sdcard file. plz help me sir to step by step.plz plz plz sir

    ReplyDelete
    Replies
    1. I suggest you try with sp flash tool it's easy way for flashing :)

      Delete
  11. hand set dead BROM ERROR:S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL (6047), MSP ERROR CODE :O*00.

    ReplyDelete
    Replies
    1. Try to Press and hold Volume Up button and insert usb cable

      Delete
  12. hello during software update my htc 526g dual crashed, i got the logo android with message ERROR. I tried hrd reset with volume up and power button and select recovery to do a hard reset but i got the android logo again saying NO COMMAND. I need your help what should i do now. Can you give me step by step how to make my phone work properly and if possible my email [email protected] you can have a follow up of my progress. Thanks i badly need help.

    ReplyDelete
    Replies
    1. First download stock ROM from the above link and also flash tool, after open flash tool, choose scatter-loading button and select .txt file, last click on download button then press and hold volume up button and insert usb cable and then starting process wait until finished note: must be charged battery up to 90%

      Delete
  13. sir i want to flashing htc desire 526g+ please help me immediately

    ReplyDelete
  14. After downloading is ok..ie 100% then what to do . The phone does not start...

    ReplyDelete
  15. Sorry gsm I've asked you about this one and not the 616 Rom.... the link of this broken please help

    ReplyDelete
  16. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. Here given two method if you want to flash via sp flash tool then no need to SD Card

      Delete
  17. my Htc 526G shows no command Error , Crashed during software update.
    How to install new software? I cant Fix it

    ReplyDelete
  18. Htc 526g+ flash time error aa raha hai (4032 ) brom error

    ReplyDelete
  19. Htc d616h Bro file kharab hai extract nahi ho rahi bad file aa raha hai

    ReplyDelete

Write Your Problem in the Below Comment Box