-->
Monday, May 25, 2015

Micromax Canvas Doodle-3 A102 Flash done in SP tool Free download or tutorial here

Posted by
Monday, May 25, 2015
Sponsored Links
Micromax Canvas Doodle-3 A102 Flash done in SP tool Free download or tutorial here


About Flash:

This tutorial tested by me, you can following this tutorial when your mobile in pattern lock, screen lock, security lock, restarting issue, hang on logo issue when you can use this tutorial but remember if you use this tutorial then you can't save data like contacts, photos, notes, videos etc you can't save it because this is factory firmware so remember that, and also remember you device battery must charged up to 80% because if your device battery low charged then try to flash so stop flash between flash after that your device will be goes in dead so remember all who use this tutorial.

About Download Firmware:

Dear all who following this tutorial remember first check your device software version after download firmware because if you can't see version and download any version who not supported in device so your device will be dead so please carefully use firmware, many devices different version of software if you want to perfect download firmware so open behind cover and take out your device battery and check S/W version which one there to be and see here and choose correct firmware and download it and enjoy.

Micromax Canvas Doodle-3 A102 Firmware or tool with different version here | Mirror

Required for flash:

  • Micromax Canvas Doodle -2 A102 device with battery charged
  • Micromax Canvas Doodle -2 A102 Firmware or tool with tested
  • Micro USB cable
  • Computer or Laptop

Procedure:

  • Download firmware
  • Extract to desktop or as you like path
  • Open Flash tool and choose scatter file
  • Now Click on Download button
  • Press and hold Volume UP key and insert usb cable
  • You are done
Micromax Canvas Doodle-3 A102 Flash done in SP tool screenshot:


V8_2_5 Flash done Screenshot:
Sponsored Links

19 comments:

  1. Replies
    1. Sorry not now i upload video tutorial, but this tutorial very easy to way for flash, if not understand just write down your comment if any problem when you flashing using this tutorial.

      Delete
  2. firstly i have to switch of my phone when connect it to usb cable

    ReplyDelete
  3. when i press and hold volume up key the page opens and say "Select Boot Mode" what mode i should select

    ReplyDelete
    Replies
    1. That final if you want to this flash device then Press and hold Volume up key and insert usb cable remember only Volume UP key :)

      Delete
    2. micromax canvas doodle a102 MMX_A102_SW_V0.0.1_HW_V2.020141127 FIRMWARE

      Delete
  4. hi bro, i flash a102 hw ver 1.0 sw v8_2_5 , same flash file ver after flash dead .......... need help, before flash set is restarting candition

    ReplyDelete
    Replies
    1. Which file downloaded ? 8GB or 4GB ? don't worry i think your device 4GB so download low version firmware and try again in flash :)

      Delete
  5. hi my mobile software version is micromax doodle3 V2.0_2014117
    and I downloaded firmware is A102_DCC_V3_13.06.214 after flashing my phone is not switched on now its dead so which version I can download pls help me

    ReplyDelete
  6. hi my mobile software version is micromax doodle3 V2.0_2014117
    and I downloaded firmware is A102_DCC_V3_13.06.214 after flashing my phone is not switched on now its dead so which version I can download pls help me

    ReplyDelete
  7. i have a problem in micromax a102
    error is showing 4032
    can u help me

    ReplyDelete

Write Your Problem in the Below Comment Box