Samsung S5610k flash done with flash tool 100% tested by me
Samsung S5610K Mobile Screenshot:
About this tutorial:
This tutorial tested by me in Samsung S5610k in that problem of restarting problem when your flash with below link flash file from below link tool i was success in flash and here also put screenshot of success flash. If you have samsung s5610k device and in that problem like hang on logo, restarting, screen lock etc problem related software so you can use this tutorial with this tested flash file or tools but remember if you use this tutorial you can't save your data if mobile live in problem of screen lock or other code and also must remember your device battery must charged and also remember before use this tutorial must your first your device of shorting problem if your device shorting and try to may be your device dead or other problem so must first check hardware after following this tutorial so next let's go how to flash Samsung S5610K in flash tools.
Download Area
Download Samsung S5610K Flash tool from HERE
Download Samsung S5610K Bin file from HERE
Download Samsung S5610K CSC file from HERE
Required for Flash:
- Samsung S5610K Device with full battery charged
- Samsung S5610K tested file (note: above files are tested)
- Micro USB cable
- Computer or Laptop
Procedure:
- Download all are files
- Extract to all are files in desktop or as you like path
- Now Open folder of S5610_Flash_Loader_7.5.3_S5610_Utopia_Lite
- Open bfloader tool
- Click on SET Model Button and choose S5610_Utopia_Setting_v00.mdl file
- Now go down and click on Main box and go ahead Click on Main Partition Table button and Choose Browse button and select S5610KDDLH2.ptt file
- Next Click on CSC box and go ahead and Click on CSC Partition Tablet button and choose Browse button and select S5610KODDLH2.ptt file
- Click on Start Button
- Insert battery in to device
- Press and Hold "1 + 3" button same time and insert usb cable
- Wait until flash done
- You are done :)
Samsung S5610K flash done with flash tool screenshot:
Samsung S5610K flash done with flash tool video:
:-)
ReplyDeletebin file not found
ReplyDeletewtf ?
Check again link updated :)
Deletetürkçe dili yok türkçe olan var mı?
ReplyDeletePlease write in English language :)
Deletecsc file not found , can you provide me another link please ?
ReplyDeleteCheck again link updated :)
DeleteWorked like a charm for a GT-5610 that kept rebooting continously. Thank you very much!
ReplyDeleteMy Pleasure :)
Deletebinary is crashed
DeleteBrother all are link working well :)
Deleteafter click on start a message seen that binary is crashed
DeleteMeans you select not proper flash file :) first choose select model 2. tick on Main option and choose file 3. last click on CSC and choose file after click on start button :)
DeleteBro I have a problem with this phone(samsung s5610k)
ReplyDeletewhenever I am downloading a jar file it shows "downloaded jar are invalid" I tried tons of java apps and 100 times format but nothing is working.
please help me....
my email is [email protected]
Brother try in Flash :) i think your problem will be solve :)
DeleteWhy do I want Turkish language Turkish language
ReplyDeleteSorry i don't understand what you say ?
DeleteIts working but after flashing my s5610k have no network.... What to do????
ReplyDeleteCheck IMEI number from the dialing *#06#
DeleteIts 0000000000000 what to do plz help???
DeleteUse Z3x box for repair Note: Imei change is crime
DeleteWhen I click the start button ,it says binary is crashed.
ReplyDeleteMy steps
#Extracted files..Installed setup exe from the sunstone folder..
opened bfloader.
Set model The file xxxxx.mdl
checked main partition table ..selected choose file and browsed to the xxxxddlxx.ppt and selected it.
checked csc file box.choose file..browsed to file xxx0dflxx.ppt
Clicked Start..
it says Binary is Crashed..
Please help me ..my no-8677911641
Brother Tick all Main partition which you select .ptt there to be partition
DeleteUnlock code
ReplyDeleteWhich code ? ?Phone code or Sim code ?
DeleteHindi language is not supporting in my 5610k
ReplyDeletehelp
Sorry for hindi language
DeleteIts good phohe 100% so, plz tell me new releasing date we are awaiting THQ
ReplyDeleteSorry i don't understand
DeleteThnks bro its wrking good..
ReplyDeleteMy pleasure brother :)
Deleteplzzz help...bf loader showing binary is crashed!😥
ReplyDeleteDownload from the here here
Deletestill showing binary is crashed😿
DeleteDid you follow video ?
Deleteyes ofcource
Deleteplzzzzzz help🙏
DeleteIf you don't mind give screenshot :)
Deletebut how???...here dsnt any option to upload pic!🙄
DeleteFollow this link here and there upload photo after uploaded there will given link for share photo it's put here
Deletehttp://prntscr.com/e2lf6r
Deletegive me teamviwer id or password :)
Deletehttps://youtu.be/HewjfF-MVA4
ReplyDeletewatch this video...😥
CSC file choose from the S5610KODDLH2_CSC folder
Deletenot worked😥..my bad luck😥😥😥
DeleteGive me teamviwer id or password I will check
Deleteimei 0000..flashed with bf loader as well z3x box...but while doing imei repair...it says connect your phone nd press power button for 3 sec..but phone is not detected yet..m tried vry much time..help plzz
ReplyDeleteIn z3x box Select S5610 model and try to repair IMEI
Deleteselected...n after that when m going to select..port block shows blank...so i cannt select...wt to do help
DeleteUse Special cable not USB which is comes with Z3x box
Deletespecial cable??🙄🙄🙄
Deletefrom where
Check this link here this type cable its called micro urt cable
Deletebinary file is crashed. check your csc file
ReplyDeleteclick on CSC file choose from the S5610KODDLH2_CSC folder
DeleteSamsung S5610 flash tool file not getting extracting getting below error
ReplyDeleteWinRAR Diagnostic messages
Download 7-zip software from this link here
Deletethanks extracted successfully but now after pressing start when i m connecting handset with usb cable with pressing 1 & 3 i m getting below error
DeleteDriver not successfully installed
Just install this driver here after that reboot computer then try above method
DeleteMirror link here
Deleteflash done sir.
Deletethank you so much
My Pleasure brother :)
Deleteflash done but same restart problem solution please
ReplyDeleteChange battery and try again
Deletethank you 100/100 to me NB boot touch 1+3
ReplyDeleteWhat languages does this firmware have? I am interested in Greek.
ReplyDeleteThank you!
English
DeleteNetwork not coming. IMEI becomes 0000000. I don't have z3x box. what to do?
ReplyDeleteuse z3x box for repair imei
DeleteGood
ReplyDelete