04 February 2015

Samsung S5610K flash done with flash tool 100% tested by me

Posted by
04 February 2015
Sponsored Links
Samsung S5610k flash done with flash tool 100% tested by me

Samsung S5610K Mobile Screenshot:

About this tutorial:

This tutorial tested by me in Samsung S5610k in that problem of restarting problem when your flash with below link flash file from below link tool i was success in flash and here also put screenshot of success flash. If you have samsung s5610k device and in that problem like hang on logo, restarting, screen lock etc problem related software so you can use this tutorial with this tested flash file or tools but remember if you use this tutorial you can't save your data if mobile live in problem of screen lock or other code and also must remember your device battery must charged and also remember before use this tutorial must your first your device of shorting problem if your device shorting and try to may be your device dead or other problem so must first check hardware after following this tutorial so next let's go how to flash Samsung S5610K in flash tools.

Download Area 
Download Samsung S5610K Flash tool from HERE
Download Samsung S5610K Bin file from HERE
Download Samsung S5610K CSC file from HERE

Required for Flash:

  • Samsung S5610K Device with full battery charged
  • Samsung S5610K tested file (note: above files are tested)
  • Micro USB cable
  • Computer or Laptop

Procedure:

  • Download all are files
  • Extract to all are files in desktop or as you like path
  • Now Open folder of S5610_Flash_Loader_7.5.3_S5610_Utopia_Lite
  • Open bfloader tool
  • Click on SET Model Button and choose S5610_Utopia_Setting_v00.mdl file
  • Now go down and click on Main box and go ahead Click on Main Partition Table button and Choose Browse button and select S5610KDDLH2.ptt file
  • Next Click on CSC box and go ahead and Click on CSC Partition Tablet button and choose Browse button and select S5610KODDLH2.ptt file
  • Click on Start Button
  • Insert battery in to device
  • Press and Hold "1 + 3" button same time and insert usb cable
  • Wait until flash done
  • You are done :)
Samsung S5610K flash done with flash tool screenshot:

Samsung S5610K flash done with flash tool video:
Sponsored Links

69 comments:

  1. türkçe dili yok türkçe olan var mı?

    ReplyDelete
  2. csc file not found , can you provide me another link please ?

    ReplyDelete
  3. Worked like a charm for a GT-5610 that kept rebooting continously. Thank you very much!

    ReplyDelete
    Replies
    1. Brother all are link working well :)

      Delete
    2. after click on start a message seen that binary is crashed

      Delete
    3. Means you select not proper flash file :) first choose select model 2. tick on Main option and choose file 3. last click on CSC and choose file after click on start button :)

      Delete
  4. Bro I have a problem with this phone(samsung s5610k)
    whenever I am downloading a jar file it shows "downloaded jar are invalid" I tried tons of java apps and 100 times format but nothing is working.
    please help me....
    my email is nitish.kumar647@gmail.com

    ReplyDelete
    Replies
    1. Brother try in Flash :) i think your problem will be solve :)

      Delete
  5. Why do I want Turkish language Turkish language

    ReplyDelete
  6. Its working but after flashing my s5610k have no network.... What to do????

    ReplyDelete
    Replies
    1. Check IMEI number from the dialing *#06#

      Delete
    2. Its 0000000000000 what to do plz help???

      Delete
    3. Use Z3x box for repair Note: Imei change is crime

      Delete
  7. When I click the start button ,it says binary is crashed.
    My steps
    #Extracted files..Installed setup exe from the sunstone folder..
    opened bfloader.
    Set model The file xxxxx.mdl
    checked main partition table ..selected choose file and browsed to the xxxxddlxx.ppt and selected it.
    checked csc file box.choose file..browsed to file xxx0dflxx.ppt
    Clicked Start..
    it says Binary is Crashed..
    Please help me ..my no-8677911641

    ReplyDelete
    Replies
    1. Brother Tick all Main partition which you select .ptt there to be partition

      Delete
  8. Hindi language is not supporting in my 5610k
    help

    ReplyDelete
  9. Its good phohe 100% so, plz tell me new releasing date we are awaiting THQ

    ReplyDelete
  10. plzzz help...bf loader showing binary is crashed!😥

    ReplyDelete
  11. https://youtu.be/HewjfF-MVA4
    watch this video...😥

    ReplyDelete
    Replies
    1. CSC file choose from the S5610KODDLH2_CSC folder

      Delete
    2. not worked😥..my bad luck😥😥😥

      Delete
    3. Give me teamviwer id or password I will check

      Delete
  12. imei 0000..flashed with bf loader as well z3x box...but while doing imei repair...it says connect your phone nd press power button for 3 sec..but phone is not detected yet..m tried vry much time..help plzz

    ReplyDelete
    Replies
    1. In z3x box Select S5610 model and try to repair IMEI

      Delete
    2. selected...n after that when m going to select..port block shows blank...so i cannt select...wt to do help

      Delete
    3. Use Special cable not USB which is comes with Z3x box

      Delete
    4. special cable??🙄🙄🙄
      from where

      Delete
    5. Check this link here this type cable its called micro urt cable

      Delete
  13. binary file is crashed. check your csc file

    ReplyDelete
    Replies
    1. click on CSC file choose from the S5610KODDLH2_CSC folder

      Delete
  14. Samsung S5610 flash tool file not getting extracting getting below error
    WinRAR Diagnostic messages

    ReplyDelete
    Replies
    1. Download 7-zip software from this link here

      Delete
    2. thanks extracted successfully but now after pressing start when i m connecting handset with usb cable with pressing 1 & 3 i m getting below error
      Driver not successfully installed

      Delete
    3. Just install this driver here after that reboot computer then try above method

      Delete
    4. flash done sir.
      thank you so much

      Delete
  15. flash done but same restart problem solution please

    ReplyDelete
  16. thank you 100/100 to me NB boot touch 1+3

    ReplyDelete
  17. What languages does this firmware have? I am interested in Greek.
    Thank you!

    ReplyDelete
  18. Network not coming. IMEI becomes 0000000. I don't have z3x box. what to do?

    ReplyDelete

If any problem just write down your message on below comment box