19 November 2014

Samsung SM-G7102 Firmware or Downgrade guide 4.4.2 (Unbrick Tested) Free here

19 November 2014
Sponsored Links
Samsung SM-G7102 Firmware or Downgrade guide 4.4.2 (Unbrick Tested) Free here
http://s26.postimg.org/whktjsd89/samsung_sm_g7102_leak.jpg

If want to repair Samsung SM-G7102, can try to repair it by. have to charge a battery with any charger and charged it by 85%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

Samsung SM-G7102  flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.

Note : This firmware Only fix Bootloop issues and always Booting in recovery mode after flash to 4.4.2 hang Logo Only recovery mode.

Download
Samsung SM-G7102 Firmware | Download
Odin Flash tool | Download

Procedure: 

  • Download tested flash file or flash tool from the above link and extract it to desktop
  • Press and hold Volume down + Home + Power button for the Download Mode
  • Open Odin flash Tools
  • Click on PDA button and choose Firmware
  • Uncheck Auto Boot in Odin option
  • Insert USB calbe to device from the computer
  • Click on Start button
  • After Flash finished Disconnect your mobile and Remove battery Wait for 20 seconds and Insert Battery Power start your Mobile via using Power on button
  • when downgraded from 4.4.2 after Hard Reset your mobile should boot
  • when flash your mobile not started after do Hard reset it
Note : if any issue when your flash this firmware and use this tutorial just write down your query in below comment box.
Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box