Xiaomi Pad 9 pro users commonly run into the phone hanging on the boot animation and never reaching the home screen, especially when dealing with Ultra Battery Saver Mode UI Lockup. The stock ROM below is a direct fix for this. This build is made specifically for the Qualcomm SM8845 Snapdragon 8 Gen 5 chipset, so confirm your exact model number (e.g. 2612CRPFFG, 2612CRPFFC) before downloading.
Running into a bootloop, a dead boot, or a Mi logo that won't go away on your Xiaomi Pad 9 pro (codename shuntian)? This page covers every fastboot and recovery firmware build currently available for the device, plus working download servers and a flashing guide you can actually follow start to finish.
One thing worth knowing upfront — fastboot ROM flashing wipes the phone completely, so only go that route if you're fine starting fresh. For a lighter repair that doesn't touch your files, the recovery ROM is normally the better choice.
Device Overview
| Brand | Xiaomi |
|---|---|
| Device | Xiaomi Pad 9 pro |
| Model Number | 2612CRPFFG, 2612CRPFFC |
| Codename | shuntian |
| Chipset | Qualcomm SM8845 Snapdragon 8 Gen 5 |
| OS Version | HyperOS 4 / Android 17 |
| Storage Variants | 128GB / 256GB |
| RAM Variants | 8GB / 16GB |
| Approx. Total Size | 12.1 GB |
| Recommended Tool | Mi Flash Tool |
Fastboot vs Recovery ROM — Which One Do You Need?
This trips up a lot of people, so here's the difference. A fastboot ROM is flashed from a PC using Mi Flash Tool and completely resets the device — the right pick when you're dealing with a bootloop, dead boot, or a phone that won't start. A recovery ROM is flashed straight from the phone's Mi Recovery menu and is built for updating, downgrading, or fixing software issues while keeping your data intact (though a backup never hurts).
🔹 Fastboot ROM
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Xiaomi Pad 9 pro | shuntian | Fastboot ROM | OS4.0.5.0.XFPCNXM | 17 | 12.1 GB | 2026-09-15 |
🔹 Recovery ROM
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Xiaomi Pad 9 pro | shuntian | Recovery ROM | OS4.0.5.0.XFPCNXM | 17 | 9.8 GB | 2026-09-23 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Xiaomi Pad 9 pro | shuntian | Recovery ROM | OS4.0.2.0.XFPCNXM | 17 | 9.8 GB | 2026-09-23 |
| Device Name | Codename | Type | MIUI Version | Android OS | Size | Date |
|---|---|---|---|---|---|---|
| Xiaomi Pad 9 pro | shuntian | Recovery ROM | OS4.0.3.0.XFPCNXM | 17 | 9.8 GB | 2026-09-23 |
Tools You'll Need
Get the flashing tool and the right USB driver set up on your PC before you start — in most cases, a failed flash has more to do with a missing driver than with the firmware file.
How to Flash Xiaomi Pad 9 pro Using Mi Flash Tool
- Download the fastboot ROM and extract it fully — don't skip extraction, Mi Flash Tool won't read a zipped folder.
- Install Mi Flash Tool from the link above and open it.
- Power off the phone, then hold Volume Down + Power together to boot into Fastboot mode.
- Connect the phone to your PC using a good-quality USB cable — cheap cables are a common cause of connection drops mid-flash.
- In Mi Flash Tool, click "Select" and point it to the extracted firmware folder.
- Once the COM port is detected, hit "Flash" and let it run — don't disconnect the phone during this step.
- The phone will reboot on its own once flashing finishes. First boot can take a few minutes longer than usual, so give it time.
Common Flashing Errors and How to Fix Them
"Auth file needed" — this usually shows up when the connected Mi account isn't authorized for flashing. You'll need an authorized account, or a test-point based flash for unlocked devices.
"COM port not detected" — almost always a driver issue. Install the Qualcomm/MediaTek USB driver from the link above, then put the phone back into EDL or Fastboot mode and try again.
"Flashing failed" partway through — try a different USB cable or port first; if that doesn't help, re-extract the firmware in case a file got corrupted during download.
Frequently Asked Questions
Is this firmware official?
Yes, these are unmodified stock builds pulled directly from Xiaomi's own update servers.
Will flashing delete my data?
Fastboot flashing wipes the device, so back up anything important first. Recovery flashing is less destructive but a backup is still a good idea.
My model number doesn't match exactly — can I still use this?
Stick to the exact codename (shuntian) shown in the table above. Flashing firmware built for a different region or variant can leave the device unusable.
How to Unlock Bootloader on Xiaomi Pad 9 pro
Steps:
- Log in to your Mi account on the phone.
- Enable Developer options: Settings → About phone → tap OS/MIUI version 7 times.
Bind your account: Settings → Additional settings → Developer options → Mi Unlock status → Add account and device. This needs a SIM card and mobile data turned on. - Download the Mi Unlock tool on your PC and sign in with the same Mi account.
- Enter Fastboot mode: power off the phone, then hold Power + Volume Down.
- Connect the phone to the PC by USB and click Unlock in the tool.
Good to know:
- Xiaomi usually enforces a waiting period (often 72 to 168 hours). The tool will tell you how long, and the account must stay bound to the phone during that time.
- Newer HyperOS versions have stricter unlock rules in some regions, so check Xiaomi's official unlock page for your region.
- After unlocking, some banking or payment apps may stop working, and Widevine L1 (HD streaming) may be lost.
- Don't flash any custom ROM or tool on a phone until you've found a confirmed guide for that exact model on XDA or the Xiaomi community.
If you hit an error like "Couldn't verify device" or a waiting-time message, let us know in the comments and we'll help.
 China Fastboot & Recovery Flash File (Stock ROM)){kind=link}
0 Comments
Write Your Problem in the Below Comment Box