Samsung Galaxy S25 Edge (SM-S937B) Test Point Enter Qualcomm EDL 9008 Mode

If you are trying to unbrick your Samsung Galaxy S25 Edge (SM-S937B) or remove an FRP lock but the device is not entering Download Mode, you will need to use the Samsung Galaxy S25 Edge Test Point. By shorting these hardware pins, you can force the device into Qualcomm 9008 Mode for flashing with professional tools.

⚠️ Disclaimer: Opening your device and shorting motherboard pins requires technical skill. This process will void your warranty. Proceed at your own risk. GSM Helpful is not responsible for any hardware damage.

Samsung Galaxy S25 Edge Test Point Details

Feature	Description
Device Name	Samsung Galaxy S25 Edge
Model Number	SM-S937B, SM-S937U, SM-S937U1, SM-S937B/DS, SM-S9370
Chipset	Qualcomm SM8750-AC Snapdragon 8 Elite
Purpose	Boot Repair, FRP Reset, Unbricking
Boot Mode	Qualcomm 9008 Mode (Test Point)
Tools Required	Pandora Box, Chimera, or UnlockTool

Samsung Galaxy S25 Edge SM-S937B Motherboard Hardware EDL Test Point Pinout Location for Qualcomm 9008 Mode

Why do you need the Samsung Galaxy S25 Edge Test Point?

The hardware test point is essential in the following scenarios:

Dead Boot Repair: When the phone is not turning on and not showing anything on the screen.
FRP Bypass: Using professional tools like UnlockTool, Chimera, or Z3X.
Locked Bootloader: When software-based methods to enter Download mode fail.
Wrong Firmware Flash: To recover a device that was flashed with the incorrect binary.

How to Connect Samsung Galaxy S25 Edge in Test Point Mode

Carefully remove the back cover of your Samsung Galaxy S25 Edge.
Disconnect the Battery Connector (Safety first).
Locate the two small golden dots (Test Points) on the motherboard (refer to the image above).
Use a pair of metallic tweezers to short (connect) these two dots.
While holding the tweezers on the dots, connect the USB Cable to your PC.
Check your PC's Device Manager. You should see "Samsung Mobile USB Serial Port" or similar under Ports.

Required Drivers

To ensure your PC detects the device, install the official Samsung USB Drivers.

Samsung Galaxy S25 Edge (SM-S937B)

Conclusion: Once the device is detected in the correct port, you can use your preferred service tool to flash the firmware or reset the device. If you have any questions regarding the pinout location, leave a comment below!

Topic Covered:

1. SM-S937B Test Point
2. SM-S937B EDL Point