If you are trying to unbrick your Xiaomi 14T (2406APNFAG) or remove an FRP lock but the device is not entering Download Mode, you will need to use the Xiaomi 14T Test Point. By shorting these hardware pins, you can force the device into MediaTek BROM Mode Dimensity 8300 Ultra for flashing with professional tools.
⚠️ Disclaimer: Opening your device and shorting motherboard pins requires technical skill. This process will void your warranty. Proceed at your own risk. GSM Helpful is not responsible for any hardware damage.
Xiaomi 14T Test Point Details
| Feature | Description |
|---|---|
| Device Name | Xiaomi 14T |
| Model Number | sunstone, 2406APNFAG |
| Chipset | Xiaomi 14T |
| Purpose | Boot Repair, FRP Reset, Unbricking |
| Boot Mode | MediaTek BROM Mode Dimensity 8300 Ultra (Test Point) |
| Tools Required | Pandora Box, Chimera, or UnlockTool |
Why do you need the Xiaomi 14T Test Point?
The hardware test point is essential in the following scenarios:
- Dead Boot Repair: When the phone is not turning on and not showing anything on the screen.
- FRP Bypass: Using professional tools like UnlockTool, Chimera, or Z3X.
- Locked Bootloader: When software-based methods to enter Download mode fail.
- Wrong Firmware Flash: To recover a device that was flashed with the incorrect binary.
How to Connect Xiaomi 14T in Test Point Mode
- Carefully remove the back cover of your Xiaomi 14T.
- Disconnect the Battery Connector (Safety first).
- Locate the two small golden dots (Test Points) on the motherboard (refer to the image above).
- Use a pair of metallic tweezers to short (connect) these two dots.
- While holding the tweezers on the dots, connect the USB Cable to your PC.
- Check your PC's Device Manager. You should see "Samsung Mobile USB Serial Port" or similar under Ports.
Required Drivers
To ensure your PC detects the device, install the official Samsung USB Drivers.
Xiaomi 14T (2406APNFAG)
Conclusion: Once the device is detected in the correct port, you can use your preferred service tool to flash the firmware or reset the device. If you have any questions regarding the pinout location, leave a comment below!
Topic Covered:
- degas Test Point (EDL Point)
- 2406APNFAG Test Point (EDL Point)
0 Comments
Write Your Problem in the Below Comment Box