How to Unlock FRP Lock (Bypass Google Account) on Redmi 14C (Android 15) using Unlock Tool

If you've ever been stuck at the Google account verification screen on your Redmi 14C (Android 15) after a factory reset, you're not alone. This is called FRP (Factory Reset Protection) lock, a security feature by Google to protect your phone. But if you've forgotten the Google account details or bought a second-hand phone, it can be a real headache.

Luckily, there's a working solution to bypass the FRP lock using a tool called Unlock Tool (please note: this tool is paid, not free). In this guide, we’ll show you a step-by-step method to bypass FRP on the Redmi 14C running Android 15 using the tested MTK method.

✅ What You’ll Need:

• A Windows PC or laptop
• A USB cable
• Unlock Tool (must be purchased)
• Proper USB drivers installed (very important)

🔧 Step-by-Step: How to Bypass FRP on Redmi 14C

1. Open Unlock Tool

Make sure you have the latest version of Unlock Tool installed. Remember, this is not a free tool, so you’ll need a valid license.

2. Go to the “MediaTek” Tab

Once the tool is open, click on the “MediaTek” tab. Redmi 14C uses a MediaTek chipset, so this section is where the magic happens.

3. Click on “MTK Universal”

This option supports a wide range of MediaTek-powered devices, including the Redmi 14C.

4. Load the Custom DA File

Click on “Custom DA” and load the file named:
Redmi_14c_lake_android_15_mtk
This file is specifically for Redmi 14C with Android 15, so make sure it’s correct.

5. Click on “ERASE FRP”

Now, hit the “ERASE FRP” button. The tool will now get ready to remove the Google account lock.

6. Turn Off the Phone

Power off your Redmi 14C using the Power button.

7. Boot into Brom Mode

Now, press and hold Volume UP + Volume Down buttons together and connect the phone to the PC using a USB cable.

8. Wait for the Process to Complete

The tool will detect your phone and begin the FRP removal process. Just wait until it says “Done” or “Success”. Once complete, disconnect your phone and power it on. The Google lock should now be gone!

🚫 USB Not Recognized? Here's Why

If your phone is not detected or you get a “USB not recognized” message, here are the common reasons:

🔌 1. Drivers Not Installed

This is the most common issue. Without proper MediaTek USB drivers installed, your PC won’t recognize the phone.

✅ Fix:

• Download and install the MediaTek USB Drivers on your PC.
• Restart your PC after installing drivers.
• Try a different USB port or cable if needed.

⚠️ 2. Bad USB Cable or Port

Some cables only support charging, not data. Make sure you're using a good-quality data cable.

🔄 3. Wrong Button Combo or Timing

You need to hold both Volume buttons BEFORE connecting the phone. If the timing is off, the PC won’t detect the device properly.