Samsung Galaxy J7 Prime (SM-G610F) XID Flash File (Stock Rom) You can use when issue in your device like Pattern lock, Screen Lock, PIN Lock, Finger Lock, Hang on logo (Stuck on Logo), Fix unfortunately app has stopped, Unfortunately app has stopped working, unfortunately app store has stopped, unfortunately apps has stopped, unfortunately your app has stopped.
Samsung Galaxy J7 Prime (SM-G610F) XID want to repair device, have to charge a battery with any charger and charged it by 80%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device.
Must take backup because after a format of a device all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged.
Impotent for Flashing Samsung Galaxy J7 Prime (SM-G610F) XID Phone first must check your micro USB cable if not good then you can't flash it so check micro USB cable second checks your device battery that is impotent for flashing, if your device battery low then possible to stop flashing.
Samsung Galaxy J7 Prime (SM-G610F) XID Binary 1 (U1) Flash File
- G610FDXS1CTE2 | Oreo (Android 8.1.0)
- G610FDXU1CSA2 | Oreo (Android 8.1.0)
- G610FDXU1CRL1 | Oreo (Android 8.1.0)
- G610FDXU1CRK1 | Oreo (Android 8.1.0)
- G610FDXS1BRF5 | Nougat (Android 7.0)
- G610FDXU1BRB3 | Nougat (Android 7.0)
- G610FDXU1BQK2 | Nougat (Android 7.0)
- G610FDXU1BQH7 | Nougat (Android 7.0)
- G610FDXU1AQG2 | Marshmallow (Android 6.0.1)
- G610FDXU1AQF1 | Marshmallow (Android 6.0.1)
Required:
- Samsung Galaxy J7 Prime (SM-G610F) XID Phone with Good Charge Battery
- Samsung Galaxy J7 Prime (SM-G610F) XID Flash File (Stock ROM)
- Samsung Galaxy J7 Prime (SM-G610F) Odin Flash Tool
- Samsung Galaxy J7 Prime (SM-G610F) USB Driver
- Micro USB Cable
- Computer OR Laptop
How to Flash Samsung Galaxy J7 Prime (SM-G610F) XID:
- Download Flash File (Stock ROM) from the above link
- Extract to Desktop
- First Install Samsung USB Driver in your Computer or Laptop (if already installed then ignore)
- Open Odin Flash Tool
- If file single then Click on AP Button and Select File
- If Multi File then Click BL, AP, CP, CSC Select One by One File
- Now Put Phone on Download Mode
- First Turn Off Phone
- Press and Hold Volume Down + Home + Power button
- If not Home button then follow blow Steps
- Turn off Phone
- Press and Hold Volume UP + Down button and Insert USB Cable
- Press Volume UP for Continue Download Mode
- Press Volume Up for continue Download Mode
- Press Start Button and Wait until Completed
Topic Covered:
- Samsung J7 Prime Flash File
- Samsung J7 Prime Firmware
- Samsung J7 Prime Stock ROM
- Samsung J7 Prime File
- G610F Flash File
- G610F Firmware
- G610F Stock ROM
- G610F File
- Samsung J7 Prime XID Flash File
- Samsung J7 Prime XID Firmware
- Samsung J7 Prime XID Stock ROM
- Samsung J7 Prime XID File
- G610F XID Flash File
- G610F XID Firmware
- G610F XID Stock ROM
- G610F XID File
- Samsung J7 Prime (U1) Flash File
- Samsung J7 Prime (U1) Firmware
- Samsung J7 Prime (U1) Stock ROM
- Samsung J7 Prime (U1) File
No comments:
Post a Comment
Write Your Problem in the Below Comment Box