If want to How to Flash Stock ROM on Redmi 7A UMT then you can try to remove it by your self have to charge a battery with any charger and charged it by 90%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device.
This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
How to Flash Stock ROM on Redmi 7A UMT you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working. If a battery is not charged, your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.
Required :
- Redmi 7A with Good Charge Battery
- UMT Dongle
- Redmi 7A Firmware / Stock ROM
- Qualcomm USB Driver
- Micro USB Cable
- Computer or Laptop
Procedure :
- Open UMT QcFire
- Go to Flasher Tab
- Click on Single Program Mode
- Click on Program button
- Choose pine_global_images_V12.0.1.0.QCMMIXM_20210121.0000.00_10.0_global_147023405e\image\rawprogram0.xml firmware folder
- Choose pine_global_images_V12.0.1.0.QCMMIXM_20210121.0000.00_10.0_global_147023405e\image\patch0.xml
- Now Put Phone on EDL Mode Using Below Image of Redmi 7A Edl Test Point Picture There Highlight Two Point Just Short it using Tweezer
- Now You can See Qualcomm USB Driver in Device Manager Check Below Image (Download Qualcomm USB Driver)
- Now Click on Flash Button and Wait Until Completed
No comments:
Post a Comment
Write Your Problem in the Below Comment Box