-->
Wednesday, December 16, 2020

Samsung M11 Frp 2020 Reset UMT

Posted by
Wednesday, December 16, 2020
Sponsored Links

If want to Remove Samsung M11 Frp 2020 Reset UMT You can try to repair it by your self have to charge a battery with any charger and charged it by 95%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged


Samsung M11 Frp 2020 Reset UMT you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working. If a battery is not charged, your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Here share post for android phone related which software issues you can easy solve using this method for free some post required box and some for free which you can solve like software related, Pattern lock, Frp lock (Bypass google account) for that you to required which in mention below in required connect with us on YouTube channel, Facebook page, Twitter, Google Plus social account you get notification of uploaded video and post

Note : Use QCFire 6.3 for Without Loader

Required :

  • Samsung M11 with Good Charge Battery
  • UMT Dongle
  • Qualcomm USB Driver
  • Micro USB Cable
  • Computer or Laptop

Procedure :

  • Open UMT Dongle (QCFire)
  • Go to "Read & Tools" Tab
  • Select "Disable Locks"
  • Click on "Reset FRP"
  • Put On EDL Model Using Below Samsung M11 Test Point Picture
Samsung M11 Test Point Picture

  • Wait Until Reset Frp Lock
Samsung M11 Frp 2020 Reset UMT

Logs :

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.3.0.9
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 412796CDA9753F93CE68BCC07BCC2D2B4FCA4F7D17CC3E17907D02EBABFA07EC
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8953_ddr.mbn]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...Failed
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.1
Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box