-->
Wednesday, April 03, 2019

How to flash Itel A22 Pro with QFIL flash tool

Posted by
Wednesday, April 03, 2019
Sponsored Links
Itel A22 Pro flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in Remove Virus, pattern lock, hard reset, flashing, software update, update, format, reset, phone lock, sim lock, pattern reset, pin lock, flash, hang on logo, only logo solve, hang logo solution, hang problem, firmware update, pattern lock, pattern unlock, pattern reset, phone lock, phone reset, format, hang on logo done, sim lock, screen lock, screen unlock, pin lock, stuck on logo done, user name password id problem, fix unfortunately app has stopped, unfortunately app has stopped working, unfortunately app store has stopped, unfortunately apps has stopped, unfortunately your app has stopped, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Itel A22 Pro want to repair this device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 85%. Your data is very important for you so it is good to do a backup of your data it may consist of your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices, you can use another external device like your hard drive, SD card or any other suitable devices. If you are doing by your own. do it at your own risk as we don't take any responsibility if your device is damaged

Itel A22 Pro you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method  can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

Download Links

Itel A22 Pro Flash file (Stock ROM)
Itel A22 Pro USB Driver 
Download

Itel A22 Pro Flash tool 
Download

Itel A22 Pro Boot key | Itel A22 Pro Edl Mode
Volume UP + Volume Down buttons

Requisite

  • Itel A22 Pro device with good battery charged, do not try with low battery
  • Itel A22 Pro Stock ROM Firmware
  • Itel A22 Pro Flash Tool
  • Itel A22 Pro USB Driver (for Flashing)
  • Micro USB Cable with good quality
  • Computer or Laptop

Procedure

  • Download tested ROM or Flash tool from above link (if link not working then write down comment on below comment box)
  • Extract to desktop both WinRAR (Note : Must your firmware folder in desktop OR C Drive)
  • Install QFIL Flash tool in your computer if installed already then ignore this option
  • Open QFIL flash tool from the C:\Program Files (x86)\Qualcomm\QPST\bin path
  • Click on "Flat Buil" option
  • Click on "Programmer Path" Browser and choose "prog_emmc_firehose_8909_ddr.mbn" file
  • Click on "Load Content..." button and choose first "rawprogram_unsparse_without_QCN" file and second choose "patch0.xml" file
  • Press and hold Volume Up + Down button and Insert USB cable for EDL mode
  • If not driver installed then Go to My Computer  Properties  Device Manager  Update driver from above link's driver (check below video)
How to Install USB Driver
  • Last Click on "Download" button and wait until completed
Screenshot


Sponsored Links

No comments:

Post a Comment

Write Your Problem in the Below Comment Box