18 December 2018

Vivo Y55s (1610) Remove Pattern Lock Miracle box

Posted by
18 December 2018
Sponsored Links
Vivo Y55s 1610 want to remove pattern lock in miracle box you can try to repair it by your self have to charge a battery with any charger and charged it by 95%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
Vivo Y55s 1610 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method can be used in any chines box and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

Vivo Y55s 1610 USB Driver and Flash tool

Required

  • Vivo Y55s 1610 phone with good charge battery
  • Miracle box
  • Vivo Y55s 1610 USB Driver
  • Micro USB Cable
  • Computer or Laptop

Procedure

  • Open Miracle box
  • Just to "Qualcomm" tab
  • Go to "Read/Format Flash" tab
  • Uncheck "Auto Programer"
  • Load Manual "prog_emmc_firehose_8917_ddr_vivo.mbn" file from the C:\Miracle Team\Miracle Thunder\TOOLS\Loaders path
  • Tick "Factory Reset" option
  • Press and hold Volume Up + Down button and Insert USB cable
  • Click on "Port" button
  • Last click on Start button
  • Wait until completed
Screenshot
Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box