Samsung J7 Pro (J730G )you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try
Samsung J7 Pro want to repair this device, can try to repair it by self . have to charge a battery with any charger and charged it by 90%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
Required
- Samsung J7 Pro (J730G ) device with good battery charged do not try with low battery
- Samsung J7 Pro (J730G ) flash file
- Samsung J7 Pro (J730G ) USB Driver
- Samsung J7 Pro (J730G ) Flash tool
- Micro USB cable with good quality
- Computer or Laptop
Procedure
- Download tested firmware or Odin flash tool from above link
- Extract to both files to desktop or as you like path ( must be installed winrar software in your computer or laptop)
- Open Odin3 folder and choose Odin3.exe file
- Click on AP button and choose AP_J730GMUBU5ARJ1_CL14471478_QB19972542_REV00_user_low_ship_meta.tar.md5 file
- Turn Off device (if your device ON)
- Press and hold Volume Down + Home + Power button for Download Mode
- Insert USB cable into device (wait until driver installed)
- Click on Start button
- Wait until full installed Android system (note : do not try unplug when your device in download mode)
- Congratulation you are done
Flash done Screenshot
Note : If any problem using this guide just leave your comment on below comment box I will soon fix it if possible
No comments:
Post a Comment
Write Your Problem in the Below Comment Box