13 October 2018

Oppo F9 Pattern Lock & FRP Lock Unlock MRT Tool

Posted by
13 October 2018
Sponsored Links
If want to remove pattern lock and frp lock in Oppo F9 phone then you can try to repair it by your self have to charge a battery with any charger and charged it by 95% and also need MRT dongle and your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged

MRT Dongle tool is license you can't solve without that if follow this post guide when you use this then may be you faced these type issue like error occurs of USB not recognized then your USB is not working. if a battery is not charged, your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Download
Oppo F9 USB Driver & Flash tool

Required

  • Oppo F9 Phone with charged battery 95%
  • MRT Tool
  • Oppo F9 USB Driver
  • Computer or Laptop

Procedure

  • Open "MRT Tool" and Choose "MTK_Tools" Tab
  • Click on "Format(Unlock)" Option
  • Click on "OPPO Only" from the Global Option
  • Select "EMMC_Flash_Init_2"
  • Click on "Start" Button
  • Press and hold Volume Up and Insert USB cable
Oppo F9 Remove Pattern Lock Screenshot:




Logs :
Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
    Get Mobile Port is:  COM40
>>> Device driver identification: 
    MediaTek USB Port
>>> Mobile Has Connect...
    CPU_NAME: MT6771
>>> Reading Mobile Hardware Info...Success
    HW_Inf:  8A00    SW_Inf:  CA00
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
    Mobile phone status:SYNC...
    Mobile phone status swtich to :brom...Success
    Make sure Mobile status has in :brom...
    Init Mobile BOOT2 ...
    =====================Flash Type(eMMC)==============
    Flash   Size: 0x0000000E8F800000 -> 59640M
    Flash     ID: 0x1501004448364441
    Flash   Name: Samsung_Unknow
    Flash symbol: DH6DAB
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile account data...
    Corresponding operation completed!!!
Sponsored Links

No comments:

Post a Comment

If any problem just write down your message on below comment box