-->
Wednesday, February 28, 2018

How to Flash Unbrick Xiaomi Redmi Note 5A

Posted by
Wednesday, February 28, 2018
Sponsored Links
Xiaomi Redmi Note 5A flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in Remove Virus, pattern lock, hard reset, flashing, software update, update, format, reset, phone lock, sim lock, pattern reset, pin lock, flash, hang on logo, only logo solve, hang logo solution, hang problem, firmware update, pattern lock, pattern unlock, pattern reset, phone lock, phone reset, format, hang on logo done, sim lock, screen lock, screen unlock, pin lock, stuck on logo done, user name password id problem, fix unfortunately app has stopped, unfortunately app has stopped working, unfortunately app store has stopped, unfortunately apps has stopped, unfortunately your app has stopped, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Xiaomi Redmi Note 5A want to repair this device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 94%. Your data is very important for you so it is good to do a backup of your data it may consist of your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices, you can use another external device like your hard drive, SD card or any other suitable devices. If you are doing by your own. do it at your own risk as we don't take any responsibility if your device is damaged
Xiaomi Redmi Note 5A you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method  can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

Download Links
Xiaomi Redmi Note 5A Flash file (Stock ROM)

Xiaomi Redmi Note 5A USB Driver

Xiaomi Redmi Note 5A Flash tool

Requisite for Xiaomi Redmi Note 5A

  • Xiaomi Redmi Note 5A device with good battery charged, do not try with low battery
  • Xiaomi Redmi Note 5A Stock ROM Firmware
  • Xiaomi Redmi Note 5A Flash Tool
  • Xiaomi Redmi Note 5A USB Driver (for Flashing)
  • Micro USB Cable with good quality
  • Computer or Laptop

      Procedure Xiaomi Redmi Note 5A

      • Download tested ROM or Flash tool from above link (if link not working then write down comment on below comment box)
      • Go to Firmware WinRAR and please rename to .tgz, if is .gz or tar
      • Extract to desktop both WinRAR (Note : Must your firmware folder in desktop OR C Drive)
      • Open C:\XiaoMi\XiaoMiFlash\ and choose XiaoMiFlash.exe file and open it
      • Click on Select button and choose Full Firmware folder from the desktop copied firmware
      • Choose "clean all and lock" on flash tool option in below see below image
      • Open behind cover and check below image Test Point
      • Touch to two point from the extractor phone and Insert USB cable then it will be gone on EDL Mode
      • If not driver installed then Go to My Computer  Properties  Device Manager  Update driver from above link's driver (check below video)
      How to Update USB Driver
      • Now click on Refresh button in XiaoMiFlash Tool, after you can see COM:10 or other on flash tool
      • Tick on clean all and lock (Note : if device cloud lock then you can use this option) otherwise choose another option
      • Click on Flash button and wait until finished the process, do not try to unplug while device in flashing mode
      • Congratulation you are done
      For hint check below video
      Sponsored Links

      No comments:

      Post a Comment

      Write Your Problem in the Below Comment Box