26 October 2016

How to Dead Boot Repair or Remove Google Lock LYF Water 1 LS-5002

Posted by
26 October 2016
Sponsored Links
LYF Water 1 LS-5002 few specification:
Operating System : Android 5.1, Processor : 1.5 GHz octa-core, Processor make : Qualcomm Snapdragon 615 MSM8939, RAM : 2GB, Internal storage : 16GB, Expandable storage Yes, Expandable storage type microSD, Expandable storage up to 32GB

Experience with this method:
This guide tested without any error you can use this when device in dead condition and also you can easy remove FRP lock without risk just put device in fastboot and use tool this is not only dead solution but many issues of software related can done using this guide I suggest you if you want to just one try done job first read all carefully read after follow step by step here also put which type software problems to be device or reason of not detect device with computer or laptop let's now dead boot repair or remove google lock in LYF Water 1 LS-5002 ?
Must Read :
If want to repair device, can try to repair it by. have to charge a battery with any charger and charged it by 98%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
About Stock ROM Firmware or Software issues:
This flash file is tested by me and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used  without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Reason of not detect with Computer or Laptop:
LYF Water 1 LS-5002 you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you. This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

Required for LYF Water 1 LS-5002:

  • LYF Water 1 LS-5002 device with well battery charged, do not try with low battery
  • LYF Water 1 LS-5002 Stock ROM Firmware (tested) | Download
  • LYF Water 1 LS-5002 USB Flashing driver | Download
  • LYF Water 1 LS-5002 Flash Tool | Download
  • LYF Water 1 LS-5002 FRP Tool | Download
  • LYF Water 1 LS-5002 FRP Guide | Download
  • Micro USB cable good quality
  • Computer or Laptop

Procedure for LYF Water 1 LS-5002:

  • First download tested Firmware, Flash tool or driver from above link (if link not working just leave your comment on below comment box i will soon fix it)
  • Extract to all are zip files to desktop or as you like path (must be installed winrar software to Extract)
  • Open Driver folder and choose Qualcomm_USB_Driver_Setup.exe file and wait until finish installation
  • Open QPST.WIN.2.7_Installer-00430.1 folder and chose setup.exe file and open and install it
  • Now open QFIL from the "C:\Program Files\Qualcomm\QPST\bin" path
  • Tick on Flat Build option
  • Go to Programmer Path and click on Browse.. button and choose prog_emmc_firehose_8916.mbn file
  • Click on Load XML.. button and choose rawprogram_unsparse.xml file and second choose patch0.xml file from the Firmware folder
Note : Above Screenshot for Example
  • Press and hold Volume Up + Down and Insert USB cable and wait until driver install
  • After drier installed just Click on Download button and wait until finish procedure
  • Congratulation you are done
LYF Water 1 LS-5002 Flash done Screenshot:

How to Remove Bypass Google Lock in LYF Water 1 LS-5002:

  • Turn off device and put device in Fastboot mode using Volumes keys
  • First try Volume Down + Power button (note : if Down key not working means not show fastboot mode then use Volume Up button)
  • Insert USB Cable to device
  • Open Qualcomm_FRPTool_C_V1.01.001 folder and choose exe file and double click on that
  • Click on Start button and wait until finished the process
  • Congrats you are done
FRP Remove Screenshot:

Sponsored Links

11 comments:

  1. I followed these steps.. I got edl fail. Switch to emergency download mode error.. Please give me any solution bro..

    ReplyDelete
    Replies
    1. Now phone which condition live or dead ?

      Delete
    2. Bro.. Chang the flash tool.... Download old qpst tool

      Delete
  2. IS there any way to root the LS-5002 ? Also Can we install TWRP recovery ? if so, How ?

    ReplyDelete
  3. after flash dead bro not detect qualcomm driver how to solve

    ReplyDelete
    Replies
    1. Follow this step : 1. charge full battery 2. after flash Press and hold Power key until vibrate phone

      Delete
  4. wat is the archive password of the ZIP File

    ReplyDelete

If any problem just write down your message on below comment box