25 August 2016

How to Flash, Bootloader unlock or Warning Boot Logo remove in Motorola Moto E XT1022 ? (Tested)

Posted by
25 August 2016
Sponsored Links
When i first try this device then coming error which failed in every file to command prompt after i search in internet but not any solution there about failed flashing then i unlock device of bootloader after easy flash without any error in unlock bootloader process easy here i procedure of that just carefully read method after following step by step before use this device check here content of all these all are impotent for this method check below.

You can use this method when device in below issues:
This flash file is tested by me and it is working very well without any error, you can use this flash file when your device you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto apk installing, auto gone balance, pattern lock, screen lock etc these type issues you can use this way etc. This is used  with out any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check your micro USB cable. if it is not good, you can not flash it. and the another one is to check your device battery. it should be not be low, it can stop your device between flash. before you flash it is necessary to save your data like contacts, photos, videos and other important things.

Motorola Moto E XT1022  you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related, if the error occurs of USB not recognized than your USB is not working.if battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box i will try my best to help you. This method  can be use without any box its done from flash tool its also available here, and it is important to installed phones driver, you can't flash or upgrade if it is not installed in your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try

Most Impotent
If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 95%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details,your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, SD card or any other suitable devices. If you are doing by your own. do it at your own risk as we don't take any responsibility if your device is damaged

Requisite for Motorola Moto E XT1022

  • Motorola Moto E XT1022 device with charged battery, do not try with low battery
  • Motorola Moto E XT1022 Stock ROM Firmware | Download
  • Motorola Moto E XT1022 mfastboot-v2 | Download
  • Motorola Moto E XT1022 mfastboot command | Download
  • Motorola Moto E XT1022 Warning Boot Logo.bin | Download
  • Motorola Moto E XT1022 USB (Flashing) Driver | Download
  • Internet Connection with good speed
  • Micro USB cable with good quality
  • Computer or Laptop

Procedure for Motorola Moto E XT1022

  • How to Unlock Bootloader in Motorola device ?
    • Install WinRAR software in your Computer or Laptop already installed ignore
    • Install USB Driver from the above link's already installed ignore
    • Now Put your device in fastboot mode using key of Volume Down + Power and Insert USB Cable
    • Open Website for Motorola Unlock Bootloader click on this link Here
    • Open Command Prompt (cmd) click on Start button choose RUN and there type cmd and hit Enter key
    • Type below command
          • fastboot oem get_unlock_data
    • Copy all codes and Click HERE, Paste in the Unlock Data Scrub box and click on Format my data and Copy code again
    • Now Paste Can my device be unlocked? box and click there. Go down and there to be Legal Agreement read all carefully after click Agree and click Request Unlock Key button
    • Check your Gmail Account ther there will be an email from Motorola site which you made the request
    • Now open Command Prompt (cmd) and type below command with code (note : remove UNIQUE_KEY and paste there your unlocked code) and hit Enter key and wait few seconds
          • fastboot oem unlock UNIQUE_KEY
    • Congratulation you are done, after unlocked device on display Warning Boot logo don't worry following below command
  • How to Remove Warning Boot Logo?
    • First Download Warning Boot Logo.bin from the above link and Extract it as path you want
    • Open this folder and Right click with Shift key choose Open command windows here
    • Type below command and hit Enter key
          • fastboot flash logo logo.bin
    • Wait until process, after done follow below command and hit Enter key, device will restarting
          • fastboot reboot
    • Congratulation you are done
  • How to Flash Motorola Moto E XT1022 ?
    • Download Firmware or mfastboot-v2.zip from the above link and do Extract both to any path you want
    • Now Copy all files in Firmware folder and Paste to mfastboot-v2 folder
    • Right click with Shift key choose Open command windows here
    • Download mfastboot command from the above link Extract from the WinRAR and open it Copy all command
    • Paste in Command windows and wait until finished the process
    • Congratulation you are done
Sponsored Links

4 comments:

If any problem just write down your message on below comment box