06 October 2015

Gionee M2 4GB Flash done with flash tool

Posted by
06 October 2015
Sponsored Links
Gionee M2 4GB Flash done with flash tool
This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Gionee M2 4GB Firmware or Flash tool download here

Required for flash:


  • Gionee M2 4GB device with well battery charged
  • Gionee M2 4GB Firmware or Flash Tool tested
  • Micro USB cable
  • Computer or Laptop

Procedure:


  • Download firmware or flash tool from above link
  • Extract to desktop or as you like path
  • Open Gionee_M2_(4GB)_0101_T8187 folder
  • Again open Flash Tool folder and choose Flash Tool.exe
  • Click on Scatter-loading button and choose MT6582_Android_scatter file
  • Now click on Download button or shortcut key F9
  • Press and hold Volume up button and insert USB cable
  • Wait until full flash
  • You are done

Gionee M2 4GB Flash done with flash tool screenshot:

Gionee M2 4GB Flash done Video:

  • Read More : Gionee M2 8GB Flash done with SP Flash Tool here
Sponsored Links

4 comments:

  1. my gionee m2 is not geting detected on my laptop

    during flashing even when i pressed and holded volume up button.

    please help me fix this problem asap.

    ReplyDelete
    Replies
    1. Many problem to be, if not device detect then step by step check, first of device usb socket, usb cable, laptop usb socket, if device detect or not start flashing then check driver if not install driver in your laptop then go here

      Delete
    2. ok sir my Gionee M2 is connected computer flashing time enable DRAM fail please help me.

      Delete
    3. Try to Click on Firmware -> Upgrade button to Flash :) if same issue then check in Hardware :)

      Delete

If any problem just write down your message on below comment box