26 September 2015

Intex Aqua 4.5E Flash done with flash tool

Posted by
26 September 2015
Sponsored Links
Intex Aqua 4.5E Flash done with flash tool

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Intex_Aqua_4.5E_V06_Indian_SER Download here
Intex Aqua 4.5E Dead After Flash Solution HERE

Required for flash:


  • Intex Aqua 4.5E device with battery charged
  • Intex Aqua 4.5E tested firmware or flash tool
  • Micro usb cable
  • Computer or Laptop

Procedure:


  • Download tested firmware or flash tool
  • Extract to desktop
  • Open flash tool
  • Click on Scatter button and choose MT6571_Android_scatter file
  • Click on Download button (or shortcut key : F9)
  • Press and hold Volume Up button and insert usb cable
  • Wait until full flash
  • You are done

Intex Aqua 4.5E Flash done screenshot:


Sponsored Links

2 comments:

  1. flash complete but still my phone doesn't on. model intex aqua 4.5E.
    what should i do? please help

    ReplyDelete
    Replies
    1. First do hard reset second try same version flash after check in hardware issue

      Delete

If any problem just write down your message on below comment box